HIWIN Linear Guideways

HIWIN HGR-R Profile Rails

HIWIN HGR-R Profile Rails Wir haben immer einen großen Vorrat an diesen HIWIN Schienen. Sehr nettes Qualitätsprodukt, das eine ausgezeichnete Basis für eine Maschine ist-. Weil diese Schienen an den Aufbau verriegelt werden können, ist die Steifheit der Maschine viel besser als mit runden Schienen.
HG15R Profile Rail€ 72.99 p/m (o. MwSt.)
€ 7.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)

configurator
HG20R Profile Rail€ 83.99 p/m (o. MwSt.)
€ 7.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)

configurator
HG25R Profile Rail€ 94.99 p/m (o. MwSt.)
€ 7.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)

configurator
HG30R Profile Rail€ 105.99 p/m (o. MwSt.)
€ 7.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)

configurator
HG35R Profile Rail€ 118.99 p/m (o. MwSt.)
€ 10.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)

configurator

HIWIN HGT Profile Rails

HIWIN HGT Profile Rails Spezielle Version des HIWIN HG Profilschienen. Statt mit Bohrungen zur Befestigung von oben, hat es thread so dass es von unten montiert werden kann. Welche kann ein Vorteil in einige Entwürfe werden. Durch die Montage von unten, es ist besser unempfindlich gegen Schmutz. Da die Oberfläche ist vollkommen glatt...
HG15T Profile Rail€ 79.99 p/m (o. MwSt.)
€ 7.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)

HG20T Profile Rail€ 89.99 p/m (o. MwSt.)
€ 7.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)

HG25T Profile Rail€ 99.99 p/m (o. MwSt.)
€ 7.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)

HG30T Profile Rail€ 109.99 p/m (o. MwSt.)
€ 7.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)

HG35T Profile Rail€ 125.99 p/m (o. MwSt.)
€ 10.00 p/cut (o. MwSt.)
mm (min: 100mm, max: 4000mm)


HIWIN Carriage HGH "Square type"

HIWIN Carriage HGH "Square type"These carriages fit the HIWIN HGR and HGT Profile rails. This particular type is a higher but compacter type model. We also have a wider HGW type model available
HGH-15-CA-Z0-H
33.99Add to shopping cart (o. MwSt.)
HGH-20-CA-Z0-H
39.99Add to shopping cart (o. MwSt.)
HGH-25-CA-Z0-H
49.99Add to shopping cart (o. MwSt.)
HGH-30-CA-Z0-H
57.99Add to shopping cart (o. MwSt.)
HGH-35-CA-Z0-H
72.99Add to shopping cart (o. MwSt.)

HIWIN Carriage HGW "Flange type"

HIWIN Carriage HGW "Flange type" Diese Wagen passten die HIWIN HGR und HGT Profilschienen. Diese bestimmte Art ist die Flanschart Modell. Wir haben auch eine kompaktere HGH Art Modell.
HGW-15-CC-Z0-H
33.99Add to shopping cart (o. MwSt.)
HGW-20-CC-Z0-H
39.99Add to shopping cart (o. MwSt.)
HGW-25-CC-Z0-H
49.99Add to shopping cart (o. MwSt.)
HGW-30-CC-Z0-H
57.99Add to shopping cart (o. MwSt.)
HGW-35-CC-Z0-H
72.99Add to shopping cart (o. MwSt.)

HIWIN Carriage HGH "Square type" HA long model

HIWIN Carriage HGH "Square type" HA long modelThe HA model, is similar to the normal HGH. Only difference is the length of the carriage. Due to the longer length, it can can carry a higher load. 9 out of 10 times the normal HGH model is the best solution. But in some cases when loads are very high, this can be a better solution.
HGH-20-HA-Z0-H
54.99Add to shopping cart (o. MwSt.)
HGH-25-HA-Z0-H
74.99Add to shopping cart (o. MwSt.)
HGH-30-HA-Z0-H
83.99Add to shopping cart (o. MwSt.)
HGH-35-HA-Z0-H
109.99Add to shopping cart (o. MwSt.)

HIWIN Carriage HGW "Flange type" HC long model

HIWIN Carriage HGW "Flange type" HC long modelThe HC model, is similar to the normal HGW. Only difference is the length of the carriage. Due to the longer length, it can can carry a higher load. 9 out of 10 times the normal HGW model is the best solution. But in some cases when loads are very high, this can be a better solution.
HGW-20-HC-Z0-H
54.99Add to shopping cart (o. MwSt.)
HGW-25-HC-Z0-H
74.99Add to shopping cart (o. MwSt.)
HGW-30-HC-Z0-H
83.99Add to shopping cart (o. MwSt.)
HGW-35-HC-Z0-H
109.99Add to shopping cart (o. MwSt.)

HIWIN Carriage SealKIT

HIWIN Carriage SealKIT Bei Verwendung HIWIN Wagen in einem schmutzigen sehr staubiger Umgebung, bietet HIWIN ein Sealkit, so dass der Wagen besser gegen Staub gesch?tzt. Die Sealkit funktioniert sowohl auf der HGW und der HGH Art der Bef?rderung. Es muss einen gesonderten Posten gekauft und montiert werden, um den Wagen.
HG-15-SW-C
9.99Add to shopping cart (o. MwSt.)
HG-20-SW-C
11.99Add to shopping cart (o. MwSt.)
HG-25-SW-C
13.99Add to shopping cart (o. MwSt.)
HG-30-SW-C
15.99Add to shopping cart (o. MwSt.)
HG-35-SW-C
17.99Add to shopping cart (o. MwSt.)

Manual Clamping Elements Series HK

Manual Clamping Elements Series HKFor use with Hiwin linear rail and other manufacturers' rail to lock carriages into a fixed position. An economical way to manually stop the sliding motion of linear guides. HK manual clamping units are intended for STATIC holding only. Using them for dynamic braking is not recommended and could damage the linear rail.
HK1501A Manual Clamping Element
75.99Add to shopping cart (o. MwSt.)configurator
HK2001A Manual Clamping Element
79.99Add to shopping cart (o. MwSt.)configurator
HK2501A Manual Clamping Element
82.99Add to shopping cart (o. MwSt.)configurator
HK3001A Manual Clamping Element
86.99Add to shopping cart (o. MwSt.)configurator
HK3501A Manual Clamping Element
89.99Add to shopping cart (o. MwSt.)configurator

Adapter Plates for HK Series Clamping Elements

Adapter Plates for HK Series Clamping ElementsWhen using the ZIMMER HK series manual clamps in combination with HIWIN or other linear guides, often an adapter plate is required to set the clamping element at the correct height relative to the carriage. ZIMMER has some standard adapter plates, pre made for this purpose. See the table which shows you which carriage + rails combination requires which clamping element and adapter plate.
PHK15-4 Adapterplate
8.99Add to shopping cart (o. MwSt.)configurator
PHK20-1 Adapterplate
8.99Add to shopping cart (o. MwSt.)configurator
PHK25-4 Adapterplate
11.99Add to shopping cart (o. MwSt.)configurator
PHK30-3 Adapterplate
12.99Add to shopping cart (o. MwSt.)configurator
PKM35-3 Adapterplate
15.99Add to shopping cart (o. MwSt.)configurator
PKM35-10 Adapterplate
17.99Add to shopping cart (o. MwSt.)configurator

Pneumatic Clamping Elements

Pneumatic Clamping ElementsPneumatic Clamping Element which is compatible with the HIWIN HGR series rails and carriages. The brake is spring loaded. Which means pneumatics need to be added/present to release the brake. This is normally done with a 5/2 Valve. This MKS type is made to hold a carriage in place, it is not suitable for active braking. In case you need this type, consult us info@damencnc.com for more information...
Pneumatic Clamping Element MKS1501A(Not in stock)
309.99 (o. MwSt.)
Pneumatic Clamping Element MKS2001A(Not in stock)
319.99 (o. MwSt.)
Pneumatic Clamping Element MKS2501A(Not in stock)
329.99 (o. MwSt.)
Pneumatic Clamping Element MKS3001A(Not in stock)
349.99 (o. MwSt.)

HIWIN Green Caps

HIWIN Green CapsThese green caps are included for free when purchasing HIWIN HGR rails from DamenCNC. Often we got requests for extra caps or spare caps. So for that reason we offer them now also separately.
HIWIN green caps for 15mm rails
(Pack Inhalt 200)
40.00 (o. MwSt.)
HIWIN green caps for 20mm rails
(Pack Inhalt 200)
52.00 (o. MwSt.)
HIWIN green caps for 25mm rails
(Pack Inhalt 200)
52.00 (o. MwSt.)
HIWIN green caps for 30/35mm rails
(Pack Inhalt 200)
52.00 (o. MwSt.)

Configurator