Connect and Tune VFD

VFD Control Box 230V

VFD Control Box 230VWe designed this VFD Control Box 230V for safe operation of the VFD-E frequency controller. For this purpose, we use a main switch and circuit breaker. We also use an E-stop, but this E-stop is not SIL certified! It only signals the VFD to make an emergency stop. Mounting the VFD in this housing also protects the VFD against physical damage by dust, chips, liquids, etc...
VFD Control Box 230V
419.99 (o. MwSt.)configurator

Connect Wiring and Tune VFD to TeknoMotor 230V

Connect Wiring and Tune VFD to TeknoMotor 230VConnecting a TeknoMotor to a VFD and setting the parameters is not a difficult task if you know what you are doing. The problem is, if you make a mistake setting the V/F curve within a few minutes you can damage the TeknoMotor. For this reason we prefer to Tune the drive for the client, to prevent any problems. You can select the cable length you need between the motor and the VFD...
Connect wiring and Tune VFD to TeknoMotor 230V€ 67.50 (o. MwSt.)
5000mm


Connect wiring and Tune VFD to TeknoMotor 230V€ 67.50 (o. MwSt.)
mm (min: 1000mm, max: 25000mm)



Connect Wiring and Tune VFD to TeknoMotor 380V

Connect Wiring and Tune VFD to TeknoMotor 380VConnecting a TeknoMotor to a VFD and setting the parameters is not a difficult task if you know what you are doing. The problem is, if you make a mistake setting the V/F curve within a few minutes you can damage the TeknoMotor. For this reason we prefer to Tune the drive for the client, to prevent any problems. You can select the cable length you need between the motor and the VFD...
Connect Wiring and Tune to TeknoMotor 380V(Star)€ 72.50 (o. MwSt.)
mm (min: 1000mm, max: 25000mm)



Configurator