ISEL Ballscrews 16mm

16mm Ballscrews No End Machining

16mm Ballscrews No End MachiningWhat is offered is just the bare ballscrew. No end machining included. If you would like also end machining. Order the total spindle length you need here and order separate the standard or custom end machining. WARNING: Above 1000mm length we cannot guarantee the balancing/run-out of the machined ends.
16mm pitch 2,5mm price per meter€ 62.99 p/m (ex. vat)
€ 2.00 p/cut (ex. vat)
mm (min: 100mm, max: 3052mm)

16mm pitch 4,0mm price per meter€ 62.99 p/m (ex. vat)
€ 2.00 p/cut (ex. vat)
mm (min: 100mm, max: 3052mm)

16mm pitch 5,0mm price per meter€ 62.99 p/m (ex. vat)
€ 2.00 p/cut (ex. vat)
mm (min: 100mm, max: 3052mm)

16mm pitch 10,0mm price per meter€ 62.99 p/m (ex. vat)
€ 2.00 p/cut (ex. vat)
mm (min: 100mm, max: 3052mm)

16mm pitch 20,0mm price per meter€ 62.99 p/m (ex. vat)
€ 2.00 p/cut (ex. vat)
mm (min: 100mm, max: 3052mm)


16mm CNC End Machining

16mm CNC End MachiningWe can do the end machining of ballscrew since we have a CNC lathe in our shop. The best option is to go for the 2 Sided ISEL standard CNC machining. The spindel wil then fit into all the parts bearing etc we sell. For large series please contact us.
16mm 2 Sided ISEL standard CNC machining
99.99Add to shopping cart (ex. vat)configurator

16mm Ballnuts Variant 1A

16mm Ballnuts Variant 1AA very compact and simple type of ballnut. Please note there is no way to keep dust out. So your machines needs something else to protect spindel from dust. Often the Variant 2 is the better choice. We use this nut only when space is tight.
16mm Variant 1A pitch 4mm 2130021000
67.99Add to shopping cart (ex. vat)configurator
16mm Variant 1A pitch 5mm 2130011000
67.99Add to shopping cart (ex. vat)configurator

16mm Ballnuts Variant 2

16mm Ballnuts Variant 2This is the type of ballnut we like to use in our own projects. Due to the rectangular shape its easy to mount. further its possible to mount wipers to keep dust out of the ballnut.
16mm Variant 2 pitch 2,5mm 2130031003
78.99Add to shopping cart (ex. vat)configurator
16mm Variant 2 pitch 4 mm 2130031004
78.99Add to shopping cart (ex. vat)configurator
16mm Variant 2 pitch 5 mm 2130031005
78.99Add to shopping cart (ex. vat)configurator
16mm Variant 2 pitch 10 mm 2130031010
78.99Add to shopping cart (ex. vat)configurator

16mm Ballnuts Variant 3

16mm Ballnuts Variant 3The Variant 3 ballnut is a tricky one. As a client you need to keep in mind that you need the mountingblocks Spannblock 1 or 2 to mount it in. Or you could make your own. Anyway without the block there is no pretension on the nut and thus it cant be used. The nice thing is that you can also mount wipers in this nut to keep dirt out further its the only ballnut available in all pitches.
16mm Variant 3 pitch 2.5mm 213503
66.99Add to shopping cart (ex. vat)configurator
16mm Variant 3 pitch 4 mm 213514
66.99Add to shopping cart (ex. vat)configurator
16mm Variant 3 pitch 5 mm 213505
66.99Add to shopping cart (ex. vat)configurator
16mm Variant 3 pitch 10 mm 213510
66.99Add to shopping cart (ex. vat)configurator
16mm Variant 3 pitch 20 mm 213520
66.99Add to shopping cart (ex. vat)configurator

Square Flange Housing

16mm SpannBlock 1 " Square Flange" 213500
34.99Add to shopping cart (ex. vat)

Round Flange Housing

Round Flange HousingThe roundflange housing can be used in combination with the Variant 3 ballnut. We prefer the square flange housing over this round type. But in some cases this round version is easier to mount.
16mm SpannBlock 2 "Round Flange" 213501
54.99Add to shopping cart (ex. vat)

Haase Square Flange Housing

Haase Square Flange HousingThis product is very similar to the ISEL Square Flange Housing. Haase uses this type of housing in their machines. They have made some small change to the ISEL design, which make it easier to mount. The ISEL flange is only drilled, so mounting can only be done with bolts that go through the housing...
Haase Square Flange Housing
29.99 (ex. vat)

Wipers for 16mm ISEL Ballscrew

Wipers for 16mm ISEL BallscrewWipers can be added to the Variant 2 and Variant 3 Ballnuts. The wipers will prevent most dirt from getting into the ballnut. We always recommend using wipers with the ballnuts.
Wiper (set of 2 pieces) 213500 0001
7.99Add to shopping cart (ex. vat)

DCNC BearingBlock for 16mm Ballscrew

DCNC BearingBlock for 16mm BallscrewFixed bearing which can be used in combination with ISEL 16mm Ballscrews. It can take axial and radial loads. It has been designed such that it can be easily combined with ITEM Profiles, it has 40mm hole spacing. Also it can be mounted in vertical or horizontal manner. The bearing can be enclosed with the included retaining ring, or when using a NEMA 23 or 34 adapter, its enclosed by this adapter...
DCNC BearingBlock for 16mm Ballscrew
49.99Add to shopping cart (ex. vat)configurator

DCNC Floating BearingBlock for 16mm ISEL Spindel

DCNC Floating BearingBlock for 16mm ISEL SpindelThe DCNC Floating Bearing has been designed for use in our Linear Slide modules as a spindle support. Due to the fact the component is so compact, we can slide our slide-plate over the bearing, which allows the use of a shorter ballscrew and hence a more compact machine. This bearing block is designed to whitstand forces in radial direction, NOT in axial direction...
DCNC Floating BearingBlock for 16mm ISEL Spindel
29.99Add to shopping cart (ex. vat)

Wrench for M10x0,75 locking nut

Wrench for M10x0,75 locking nutThe thread used in the end machining is special fine thread. M10x0.75mm. A special nut an wrench is required for this thread. The reason fine thread is used, is to make a more delicate adjustment of the pre tension on the ballbearings possible.
Wrench for M10x0,75 locking nut
7.99 (ex. vat)

M10x0.75mm locking nut

M10x0.75mm locking nutThe thread used in the end machining is special fine thread. M10x0.75mm. A special nut an wrench is required for this thread. The reason fine thread is used, is to make a more delicate adjustment of the pre tension on the ballbearings possible.
M10x0.75mm locking nut
3.99 (ex. vat)

Spacer

SpacerWe often use these spacers to get the correct offset of our ballscrews in the assemblies we make.
Spacer 10x12 L=14mm
4.99 (ex. vat)
Spacer 10x20 L=10mm
2.50 (ex. vat)
Spacer 17x28 L=12mm
3.99 (ex. vat)

Spare Balls for ISEL ballnuts

Spare Balls for ISEL ballnutsOften during assembly of ballnuts, by accident balls are lost. This can happen when the mounting tool is not properly used, or when end machining of the spindel is not correct. We mount ballnuts on ballscrews on a daily basis, and even here, sometimes it goes wrong. Instead of ordering a new ballnut, you can also try reassembling the old one. It is not an easy job...
2,0mm (100 pieces)
19.99 (ex. vat)
2,5mm (100 pieces)
19.99 (ex. vat)
3,5mm (100 pieces)
19.99 (ex. vat)

Spare Umlenkteil for ISEL 16mm Ballscrew

Spare Umlenkteil for ISEL 16mm BallscrewThis plastic part, is what is used in the ISEL ballnuts to redirect the balls. It is required otherwise the balls would not be able to recirculate in the nut. Sometimes this plastic part can get damaged during overload or a machine crash. We offer it here as a spare part, so you can refurbish your ballnut, after such an event.
Variant 1a Umlenkteil 16x4mm
4.99 (ex. vat)
Variant 1a Umlenkteil 16x5mm
4.99 (ex. vat)
Variant 2 Umlenkteil P=2.5 mm
6.99 (ex. vat)
Variant 2 Umlenkteil P=4.0 mm
6.99 (ex. vat)
Variant 2 Umlenkteil P=5.0mm
6.99 (ex. vat)
Variant 2 Umlenkteil P=10.0mm
6.99 (ex. vat)
Variant 2 Umlenkteil P=20.0mm
6.99 (ex. vat)

Configurator