KRESS Milling Motor

Kress 1050 FME-P

Kress 1050 FME-PAdvanced Kress Milling motor. In contrast to other Kress milling motors, this motor has an ER16 collet system with balanced clamping nut, which results in 3 x better repeatability of concentricity compared to regular Kress collet system. Guaranteed concentricity in the cone < 0,01 mm.
Kress 1050 FME-P (220VAC)
229.99Add to shopping cart (ex. vat)configurator

Kress 1050 FME-1

Kress 1050 FME-1Standard Kress Milling motor. It has more power than the FME 800-Q, but lower rpm range. Like the FME 800-Q, it has a quick lock connector.
Kress 1050 FME-1 5000-25000 RPM (220VAC)
155.99Add to shopping cart (ex. vat)configurator

Kress 800 FME-Q

Kress 800 FME-QStandard Kress Milling motor. It has a higher speed range than the FME 1050-1: between 10.000rpm and 29.000rpm, but less power. Compared to the FME 800, it has a removable quick-action lock cable.
Kress 800 FME-Q (220VAC)
147.99Add to shopping cart (ex. vat)configurator

Kress 800 FME

Kress 800 FMEBasic Kress Milling motor, available in 220V and 110V version.
Kress 800 FME (220VAC)
139.99Add to shopping cart (ex. vat)configurator
Kress 800 FME 110V USA version w/ 8mm collet
139.99Add to shopping cart (ex. vat)configurator

Kress Collet + Clamping Nut (530FM, 800FME, 1050(1)FME)

Kress Collet + Clamping Nut (530FM, 800FME, 1050(1)FME)Original Kress collets in several sizes. Included with the collet is a collet nut. Designated for 530 FM, 800FME, 1050FME and 1050-1 FME. WARNING: does not fit on the Kress 1050 FME-P !!!!
2.00 mm Kress Collet + Clamping Nut
24.99Add to shopping cart (ex. vat)
3/32 Inch (2.38mm) Kress Collet + Clamping Nut
21.99Add to shopping cart (ex. vat)
3.00 mm Kress Collet + Clamping Nut
19.99Add to shopping cart (ex. vat)
1/8inch (3.175mm) Kress Collet + Clamping Nut
19.99Add to shopping cart (ex. vat)
4.00 mm Kress Collet + Clamping Nut
19.99Add to shopping cart (ex. vat)
5.00 mm Kress Collet + Clamping Nut
21.99Add to shopping cart (ex. vat)
6.00 mm Kress Collet + Clamping Nut
19.99Add to shopping cart (ex. vat)
1/4 inch (6.35mm) Kress Collet + Clamping Nut
19.99Add to shopping cart (ex. vat)
8.00 mm Kress Collet + Clamping Nut
19.99Add to shopping cart (ex. vat)
10.00 mm Kress Collet + Clamping Nut
21.99Add to shopping cart (ex. vat)

KRESS Straight grinder attachment GSV

KRESS Straight grinder attachment GSVThe KRESS Straight grinder attachment GSV, can be used to turn a KRESS milling motor into a hand grinder. Its compatible with the normal KRESS collet system. It is not compatible with the 1050-P that used the ER system.
KRESS Straight grinder attachment GSV
99.99 (ex. vat)configurator

Kress-Mounting Block

Kress-Mounting BlockThis block can be used to mount the kress motor to a Z axis or other fixture. The block is constructed from 20mm thick aluminium which makes it a sturdy attachment.
Kress Mounting Block V2.0
29.99Add to shopping cart (ex. vat)

Floating Head for engraving

Floating Head for engravingFor fine engraving work often a floating head is used. The reason you need a floating head/depth controller is simple. When making for example a line thickness of 0.2mm with a V engraving bit, the width of the line will change if the table or material is not exactly flat. Since no table of a CNC machine is flat over the entire surface within a hundreds of a mm...
Floating Head for engraving
238.99 (ex. vat)configurator

Colinbus KRESS + Vacuum fixture

Colinbus KRESS + Vacuum fixtureA mounting plate for the KRESS milling motor. Most often sold in combination with a vertical mount for the Profiler or Profiler Pro. But it could/can be used on other CNC machines as well. It als has an adapter for mounting a vacuum hose.
Colinbus Kress + Vacuum fixture
29.99Add to shopping cart (ex. vat)configurator

Adapter Kress RS1400 to Profiler Vacuumfixture

Adapter Kress_RS1400 to Profiler Vacuumfixture
9.99 (ex. vat)

Colinbus Profiler improved vertical mount

Colinbus Profiler improved vertical mountThe colinbus profiler is a small DIY build cnc router. The standard included milling motor is the weak link in the design. However replacing it by a much better kress motor cannot be done directly without changing some parts on the machine. The parts offered in this section of the site will make the kress directly compatible with the machine...

ProfilerPro improved Vertical mount

ProfilerPro improved Vertical mountThe Colinbus profiler is a small DIY build CNC router. The standard included milling motor is the weak link in the design. When this motor is replaced by Kress motor a better performance is achieved. The required additional parts which are necessary for this retrofit are offered here. The parts improve the machine stiffness, and features a connection for a standard vacuum hose.

KRESS Wrench 17mm

KRESS Wrench 17mmFrom factory the KRESS milling motors do not come with a wrench to tighthen the locking nut. We have made this very simple tool ourselves, since many clienst are requesting it. The Wrench is 3mm thin, and will fit perfectly unlike normal wrenches which are thick, and can get caught between tooling and the clamping nut. Designated for 530 FM, 800FME, 800FME-Q and 1050FME-1.
KRESS Wrench 17mm
8.99Add to shopping cart (ex. vat)

KRESS Mains cable with patented quick-action lock

KRESS Mains cable with patented quick-action lockKRESS Mains cable with patented quick-action lock. This cable is used on the KRESS 1050 and 1050-1 milling motor. But is also suitable for over 30 other KRESS tools that use this same system.
Kress 6m Mains Cable Patented Quick Action Lock
22.99Add to shopping cart (ex. vat)

Kress Spare Clamping Nut

Kress Spare Clamping NutExtra clamping nut. To save time with tool changes some people have clamping nut for each clamp. For 530 FM, 800 FME, 800 FME-Q, 1050 FME & 1050 FME-1
Kress Clamping Nut
9.99Add to shopping cart (ex. vat)

Kress Spare Clamping Nut 1050 FME-P

Kress Spare Clamping Nut 1050 FME-PExtra clamping nut. To save time with tool changes some people have clamping nut for each clamp. For 1050 FME-P.
Kress Clamping Nut 1050 FME-P
19.99Add to shopping cart (ex. vat)

Kress Spare Brushes

Kress Spare Brushes A set of spare brushes for when the ones one your milling motor have worn out. The kress brushes have an automatic shut off function to prevent damage to the motor when brushes are worn.
Brush Pair (left and right) 800 /1050FME(1)
9.99Add to shopping cart (ex. vat)
Brush for FM6990E (you need 2 per motor)
4.99 (ex. vat)

KRESS Brush Holder 530,800,1050

KRESS Brush Holder 530,800,1050
4.99Add to shopping cart (ex. vat)

Kress Spare MagneticRing FME800/1050/1050-1

Kress Spare MagneticRing FME800/1050/1050-1The KRESS motors are very reliable, and when they do fail the fixes are cheap. If your kress motor is running erratically. Replacing the magnetic ring could be the solution
Kress Spare Magnetic Ring FME800/ 1050/ 1050-1
2.99Add to shopping cart (ex. vat)

Kress Spare MainShaft

Kress Spare MainShaftA spare mainshaft for the kress 530/800/1050. But thats not what we use it for :). It is most often sold as a toolholder, for machines that have ER25 or larger collets. Since the tools is fixed in the holder, when doing a toolchange one can use the value stored in the Tool table of the machinesoftware (USBCNC) for the length offset...
Kress Spare MainShaft
19.99 (ex. vat)

Kress Spare Ball Bearing 6002(SKF)

Ball Bearing 6002(SKF)
5.99 (ex. vat)

Kress Spare Electronics

Kress Spare ElectronicsThis is an item that rarely is broken on the Kress. But it can happen, so we offer it here. Keep in mind if your Milling Motor stops working, most likely it is just the brushes that are worn.
Kress Spare Electronics 800 FME (35740)
39.99 (ex. vat)
Kress Spare Electronics 1050 FME (35741)
39.99 (ex. vat)
Kress Spare Electronics 1050 FME-1 (38363)
39.99 (ex. vat)

Configurator