ATC Motor HSK63F

TeknoMotor with Toolchanger ATC71-C-HSK63F-LN

TeknoMotor with Toolchanger ATC71-C-HSK63F-LNThe electrospindles series ATC71 have been designed to develop high power with limited overall dimensions. This type of electrospindle is suitable to be installed on automatic machines for machining wood, aluminum and plastics. Thanks to the stiffness of the mechanical components, the speed of tool changing and the quality of electrical components of this electrospindle...
ATC71-C-HSK63F-LN S1 7.5Kws6 9.0Kw at 200Hz 12000rpm, max 400Hz 24000rpm, 380V
3,999.99Add to shopping cart (ex. vat)configurator

HSK Cleaner and Lubricant

HSK Cleaner and LubricantWe advise to use this Lubricant for maintenance of ATC and QTC motors with HSK system. Lusin® Lub PM 1001 is used as lubricant for screw connections subject to high temperatures and pressures, e.g. screws of injection moulding machines or dies in extrusion. It can also be used as seizure preventing heat conductive assembly paste for all kind of applications.
HSK Cleaner and Lubricant Lusin Lub PM1001 400ml
19.99Add to shopping cart (ex. vat)

Mounting Device HSK63

Mounting Device HSK63For easy and safe clamping of tool shanks at the flange using rollers for mounting and removing cutting tools, therefore self clamping and ideal for HSK forms E and F as well as polygonal shanks. This model is for HSK63, wel also have models for other types. for all common tool shanks such as SK (DIN 69871), HSK (forms A, B, C, D, E, F), polygonal, MAS/BT (JIS B 6339) and CAT (ANSI B5.50)
Mounting Device HSK63 C6 SK40 MAS/BT40 CAT40
169.99 (ex. vat)

HSK 63F(A/C/E 50) Taper Spindle Wiper

HSK 63F(A/C/E 50) Taper Spindle WiperUsed to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.
HSK 63F(A/C/E 50) Taper Spindle Wiper
69.99 (ex. vat)

ETP HYDRO-GRIP® Pencil-12x100/HSK63F

ETP HYDRO-GRIP® Pencil-12x100/HSK63FThe TeknoMotor ATC is often used in Robotic Milling Projects. For Robotic milling, often long tools are required to be able to correctly reach the product/object. The problem with long tools is unbalance, which can cause damage to bearings. These ETP Pencil Routers are balanced to highest standards and have very low run-out...
ETP HYDRO-GRIP Pencil-12x100/HSK63F (684450)
359.99 (ex. vat)configurator

ETP HYDRO-GRIP® Pencil-12x150/HSK63F GL=270

ETP HYDRO-GRIP® Pencil-12x150/HSK63F GL=270	The TeknoMotor ATC is often used in Robotic Milling Projects. For Robotic milling, often long tools are required to be able to correctly reach the product/object. The problem with long tools is unbalance, which can cause damage to bearings. These ETP Pencil Routers are balanced to highest standards and have very low run-out...

ETP HYDRO-GRIP Pencil-20x110/HSK63F

ETP HYDRO-GRIP Pencil-20x110/HSK63F The TeknoMotor ATC is often used in Robotic Milling Projects. For Robotic milling, often long tools are required to be able to correctly reach the product/object. The problem with long tools is unbalance, which can cause damage to bearings. These ETP Pencil Routers are balanced to highest standards and have very low run-out...
ETP HYDRO-GRIP Pencil-20x110/HSK63F (684490)
419.99 (ex. vat)

ETP HYDRO-GRIP® G2 HSK63F

ETP HYDRO-GRIP® G2 HSK63FHYDRO-GRIP type G2 is extremely user friendly which means quick and easy tool changes. It has a tough and compact design and it is the most slender chuck in our range. A safety feature prevents the tool from falling out when the chuck is not pressurized. The tool shank must be equipped with a thread corresponding to the safety screw size. See the youtube movie, on how this collet chuck works
G2-12 ETP HYDRO-GRIP G2 HSK63F
312.99Add to shopping cart (ex. vat)configurator
G2-16 ETP HYDRO-GRIP G2 HSK63F
312.99Add to shopping cart (ex. vat)configurator
G2-20 ETP HYDRO-GRIP G2 HSK63F
312.99Add to shopping cart (ex. vat)configurator
G2-25 ETP HYDRO-GRIP G2 HSK63F
312.99Add to shopping cart (ex. vat)configurator

Reduction Sleeves for ETP Toolholders

Reduction Sleeves for ETP ToolholdersThe reduction sleeves are designed to fit with the ETP Toolholders. They are specially suited for high precision clamping of cylindrical tool shanks per DIN 6335 form HA, HB and HE, as well as tool shanks per DIN 1835 form B, C, D and E. The special design of the reduction sleeves allows an efficient use of coolant through cutting tools.
HS 12 / 3.00mm Reduction sleeve for ETP toolholders
109.99 (ex. vat)
HS 12 / 4.00mm Reduction sleeve for ETP toolholders
99.99 (ex. vat)
HS 12 / 5.00mm Reduction sleeve for ETP toolholders
99.99 (ex. vat)
HS 12 / 6.00mm Reduction sleeve for ETP toolholders
94.99 (ex. vat)
HS 12 / 8.00mm Reduction sleeve for ETP toolholders
94.99 (ex. vat)

HSK63F OZ25 462E Toolholder for ATC

HSK63F OZ25 462E Toolholder for ATCThis type of toolholder has the OZ25 462E type of collet system. Most often we use ER collet system with our Milling motors, its affordable and has a good price/quality ratio. This OZ25 462E system is more precise than the ER system, and we recommend to use this, when you have long tools. Often used in robotic milling for example...
HSK63F OZ25 462E D60 A=76 L=101Toolholder for ATC
179.99 (ex. vat)

HSK63F ER32 Toolholders for ATC

HSK63F ER32 Toolholder + Balanced Nut
99.99Add to shopping cart (ex. vat)configurator

TeknoMotor Toolholder Fork HSK63F

TeknoMotor Toolholder Fork HSK63FToolholder fork for HSK63F toolholders. This product is designed and made in Holland. We always try to offer our clients the complete package of parts, for a good price. The problem with the Toolforks we found in the market, was that they had a very high price, and the quality was not what we expected. For that reason we decided to design/make our own toolforks.
TeknoMotor Toolholder Fork HSK63F
49.99Add to shopping cart (ex. vat)

ETP Torque Wrench 6Nm

ETP Torque Wrench 6NmVersion : Torque screwdriver with T-handle and non-slip surface. The torque is fixed. Toolholder with permanent magnet. When the torque is reached the screwdriver triggers with clearly audible and perceptible signal. The long-travel indication gives the user an unmistakable signal that the set torque has been reached. Application : In conjunction with 1/4″″ bits with C6.3 or E6...
ETP Torque Wrench 5,7 Nm (including SW5 bit)
29.99 (ex. vat)
ETP Socket Attachment - Type A 1/4" SW5
6.99 (ex. vat)

Configurator