General USBCNC Accessories
MPG Handwheel
This is one of the most handy add-ons we sell for USBCNC. Since we have got so many positive responses to the product we include it as a standard item when we supply the Performance version of our Ready to Run set. The product can be used in 2 sections of the software. It was intended for use to jog the machine, when you enter the jog menu of the USBCNC software (shortkeys f12,f9,f9)...
| MPG Handwheel | € 169.99 (ex. vat)  |
CPU/Sensor Holder
This is a product that has been developed for our RTR CNC controllers. It’s a device that protects the inputs of the USBCNC CPU (4&5b) and allows sensors of almost any type to be easily connected, using industry standard m12 sensor connectors. When a short circuit is made or if an incorrect voltage is attached, only the optocoupler will be broken...| CPU/Sensor Holder | € 139.99 (ex. vat) |
RTR Relays module (Tool Flood)
We use this module in all our RTR controllers. It has two 230V solid state relays. These relays are most often used used to switch a KRESS milling motor(Tool) and a coolant pump(Flood). The module interfaces with USBCNC CPU V4 or V5, via a ribbon cable. On the PCB there are 2 jumpers allowing you to choose which signal from USBCNC controls the relays...| RTR Relays module (Tool Flood) | € 69.99 (ex. vat) |
0-10V Spindle Speed Control V2 CPU V4/V5B
| 0-10V Output Spindle Speed Control V2 | € 69.99 (ex. vat) |
0-10V Spindle Speed Control CPU V4/V5B
These parts are plug and play with USBCNC. They are designed in such a manner that they will work with CPU V3 V4 and V5B | 0-10V Output Spindle Speed Control(NOT IN STOCK) | € 69.99 (ex. vat) |
10 Pole Ribbon -->> screw terminal interface
The USBCNC interfaces have ribbon cable connectors. These work very well with all our plug and play devices. But sometimes a custom connection needs to be made. Then this ribbon to screw terminal interface is a great product. It makes the wiring a lot easier.| 10 Pole Ribbon -->> screw terminal interface | € 12.99 (ex. vat) |
10 Pole Ribbon -->> Signal Multiplier
The USBCNC interfaces have ribbon cable connectors. These work very well with all our plug and play devices. But sometimes one of the outputs on the USBCNC board needs to be used multiple times. In that case this signal multiplier is a nice product. It allows one ribbon cable connection to be duplicated 3 times. | 10 Pole Ribbon -->> Signal Multiplier | € 9.99 (ex. vat) |
26PoleRibbon -->>SUB-D-->>screw terminal interface
This is a handy device we often use for testing equipment. It has several features integrated in one product. We most often use it for easy connection of wiring to ribbon cables(10/20/26 pole). But it also has gender changer for 25 pole SUB-D connectors. It can be combined with USBCNC CPU5A for more easy connection than the normal solder connection.| 26 Pole Ribbon -->> SUB-D-- >> screw terminal interface | € 25.99 (ex. vat) |
Brake/Relay Module
 Brake_Relay Module.jpg)
We use this circuitboard already for several years in our RTR controllers. It is integrated as a standard item in the RTR performance, to activate/deactivate the electormechanical brake often used in the Z axis of CNC routers. But it is also possible via a jumper to select a different channel like Tool or Flood to switch the relay on the board...| Relay (Brake) Module (12V) | € 19.99 (ex. vat) |
| Relay (Brake) Module (24V) | € 19.99 (ex. vat) |
Driver Compatibility PCB CPU V3 V4 V5B
USBCNC CPU V3 V4 and V5B use 10 pole ribbon cable (flat cable) to make connections to the stepper drives or servo drives. Since often mistakes were made here in wiring, we developed already a few years ago a small PCB that goes into the stepper drive. Then no wiring is needed anymore. All that is needed is a 10 pole ribbon cable between the USBCNC CPU and the stepperdrives...| 5042&5056 Compatibility PCB | € 4.99 (ex. vat) |
| 8078 Compatibility PCB | € 4.99 (ex. vat) |
Driver Compatibility PCB HBS86
USBCNC CPU V3 V4 and V5B use 10 pole ribbon cable (flat cable) to make connections to the stepper drives or servo drives. Since often mistakes were made here in wiring, we developed already a few years ago a small PCB that goes into the stepper drive. Then no wiring is needed anymore. We recently also made this board for the HBS86 closed loop driver...| Driver Compatibility HBS86 | € 5.99 (ex. vat) |
Breaking news
2012-11-17
NEW PRODUCT Mini Mill Spiral Patterned
Tool designed for milling glas and epoxy based materials2012-10-11
NEW PRODUCT Closed Loop Stepper Systems
A lowcost alternative to a servo system2012-06-30
New Bulk Discount
New Bulk Discount feature added to DamenCNC website
We supply worldwide!
