Milling Cutter
VHM-Endmills for GFP CFP
This cutting tool is made for cutting glass-fibre and carbon fibre-reinforced plastics. It has a special spiral pattern. It also has a cutting edge at the bottom, so it can be used for milling and drilling.| 2mm VHM-Endmill for GFP CFP | € 36.99 (ex. vat)  |
| 3mm VHM-Endmill for GFP CFP | € 39.99 (ex. vat) |
| 4mm VHM-Endmill for GFP CFP | € 47.99 (ex. vat) |
| 5mm VHM-Endmill for GFP CFP | € 49.99 (ex. vat) |
| 6mm VHM-Endmill for GFP CFP | € 52.99 (ex. vat) |
| 8mm 25mm Flute VHM-Endmill for GFP CFP | € 71.99 (ex. vat) |
| 8mm 40mm Flute VHM-Endmill for GFP CFP | € 88.99 (ex. vat) |
| 10mm Flute VHM-Endmill for GFP CFP | € 88.99 (ex. vat) |
| 12mm Flute VHM-Endmill for GFP CFP | € 109.99 (ex. vat) |
| 14mm Flute VHM-Endmill for GFP CFP | € 139.99 (ex. vat) |
HSS Roughing Mills
This is a tool that we use when we need to remove a lot of material. It designed for rough milling in Aluminium and other soft long chipping materials. The surface finish is very rough. So you always need to use another mill (endmill) for finishing. The advantage of a Roughing Mill is that its a lot less sensitive for breaking due to chips getting stuck between the flutes.| HSS Roughing Mill 6.00mm | € 41.99 (ex. vat) |
| HSS Roughing Mill 8.00mm | € 44.99 (ex. vat) |
| HSS Roughing Mill 10.00mm | € 51.99 (ex. vat) |
| HSS Roughing Mill 12.00mm | € 60.99 (ex. vat) |
VHM-Long Ballnose Endmills
We have added this item to the webshop since we were getting many requests for extra long ballnose cutters. These cutters are used for prototyping of products where deep cuts need to be made. Not only is the cutter long, but it also has a long flute length. Which allows a deep cut on each pas. Overal this makes it a very productive tool in wood,foam and aluminium.| VHM-Long Ballnose 3.00mm | € 28.99 (ex. vat) |
| VHM-Long Ballnose 4.00mm | € 34.99 (ex. vat) |
| VHM-Long Ballnose 5.00mm | € 44.99 (ex. vat) |
| VHM-Long Ballnose 6.00mm | € 49.99 (ex. vat) |
| VHM-Long Ballnose 8.00mm | € 62.99 (ex. vat) |
| VHM-Long Ballnose 12.00mm L=150mm | € 159.99 (ex. vat) |
VHM-Endmills for Aluminium
These single flute endmills are especially suited for cutting aluminium. They are made from solid carbid (VHM), and are right hand cutting with a right hand spiral.
See a movie of the cutters in action on youtube.
http://www.youtube.com/watch?v=Q9lZm6AQc-g&feature=player_profilepage| 2mm Endmill for Aluminium | € 16.99 (ex. vat) |
| 2.5mm Endmill for Aluminium | € 17.99 (ex. vat) |
| 3mm Endmill for Aluminium | € 18.99 (ex. vat) |
| 4mm Endmill for Aluminium | € 20.99 (ex. vat) |
| 5mm Endmill for Aluminium | € 25.99 (ex. vat) |
| 6mm Endmill for Aluminium Short CL18mm | € 30.99 (ex. vat) |
| 6mm Endmill for Aluminium Long CL25mm | € 36.99 (ex. vat) |
| 8mm Endmill for Aluminium Short CL22mm | € 46.99 (ex. vat) |
| 8mm Endmill for Aluminium Long CL40mm | € 56.99 (ex. vat) |
| 10mm Endmill for Aluminium | € 76.99 (ex. vat) |
| 12mm Endmill for Aluminium | € 96.99 (ex. vat) |
VHM-Endmills for Plastics
Solid carbide one flute endmills for plastic, right hand cutting with left hand spiral. Especially suited for cutting all plastics, glassfibre reinforced polyesters as well as carbonfiber.| 2mm Endmill for Plastics | € 16.99 (ex. vat) |
| 2.5mm Endmill for Plastics | € 17.99 (ex. vat) |
| 3mm Endmill for Plastics | € 18.99 (ex. vat) |
| 4mm Endmill for Plastics | € 20.99 (ex. vat) |
| 5mm Endmill for Plastics | € 25.99 (ex. vat) |
| 6mm Endmill for Plastics Short CL18mm | € 30.99 (ex. vat) |
| 6mm Endmill for Plastics Long CL25mm | € 36.99 (ex. vat) |
| 8mm Endmill for Plastics Short CL22mm | € 46.99 (ex. vat) |
| 8mm Endmill for Plastics Long CL40mm | € 56.99 (ex. vat) |
| 10mm Endmill for Plastics | € 76.99 (ex. vat) |
| 12mm Endmill for Plastics | € 96.99 (ex. vat) |
VHM-Endmill-Alu-2 Flute
These two flute endmills are especially suited for cutting aluminium, plastic and copper alloys (non ferrous metals). They are made from solid carbid (VHM). | 1.00mm VHM-Endmill-Alu-2 Flute | € 16.99 (ex. vat) |
| 1.50mm VHM-Endmill-Alu-2 Flute | € 16.99 (ex. vat) |
| 2.00mm VHM-Endmill-Alu-2 Flute | € 16.99 (ex. vat) |
| 2.50mm VHM-Endmill-Alu-2 Flute | € 16.99 (ex. vat) |
| 3.00mm VHM-Endmill-Alu-2 Flute | € 14.99 (ex. vat) |
| 4.00mm VHM-Endmill-Alu-2 Flute | € 16.99 (ex. vat) |
| 5.00mm VHM-Endmill-Alu-2 Flute | € 20.99 (ex. vat) |
| 6.00mm VHM-Endmill-Alu-2 Flute | € 25.99 (ex. vat) |
| 8.00mm VHM-Endmill-Alu-2 Flute | € 37.99 (ex. vat) |
| 10.00mm VHM-Endmill-Alu-2 Flute | € 55.99 (ex. vat) |
| 12.00mm VHM-Endmill-Alu-2 Flute | € 66.99 (ex. vat) |
VHM-Deep Reach Mills for Aluminium & Plastics
Solid Carbide Mills for Aluminum&Plastics. Tool Geometry especially for Aluminum (2 flutes) and Plastics. Deep reach tools with long flute length. Intended for applications where a normal tool is not long enough.
Each Set of 5 contains 2x 3mm tools, 60mm length, and one of 4,5 and 6mm diameter with a length of 75mm| VHM-Deep Reach for Alu&Plastics 3.0mm | € 12.99 (ex. vat) |
| VHM-Deep Reach for Alu&Plastics 4.0mm | € 14.99 (ex. vat) |
| VHM-Deep Reach for Alu&Plastics 5.0mm | € 16.99 (ex. vat) |
| VHM-Deep Reach for Alu&Plastics 6.0mm | € 21.99 (ex. vat) |
| VHM-Deep Reach for Alu&Plastics Set of 5 | € 71.99 (ex. vat) |
HSS-Mini End Mills, Three Flutes
These are mini endmills which work very nice with the kress and other hobby motors. The pricing is quite nice. It has some features which makes it nice for the hobbyist. It no problem to drill with this endmill for example. Another nice feature is the clamped diameter of all these mills is 6mm. So you dont need special clamps.| Mini End Mill short 1.5mm | € 9.99 (ex. vat) |
| Mini End Mill short 2mm | € 9.99 (ex. vat) |
| Mini End Mill short 2.5mm | € 9.99 (ex. vat) |
| Mini End Mill short 3mm | € 9.99 (ex. vat) |
| Mini End Mill short 3.5mm | € 9.99 (ex. vat) |
| Mini End Mill short 4mm | € 9.99 (ex. vat) |
| Mini End Mill short 4.5mm | € 9.99 (ex. vat) |
| Mini End Mill short 5mm | € 9.99 (ex. vat) |
| Mini End Mill short 5.5mm | € 9.99 (ex. vat) |
| Mini End Mill short 6mm | € 9.99 (ex. vat) |
| Mini End Mill long 2mm | € 11.49 (ex. vat) |
| Mini End Mill long 2.5mm | € 11.49 (ex. vat) |
| Mini End Mill long 3mm | € 11.49 (ex. vat) |
| Mini End Mill long 3.5mm | € 11.49 (ex. vat) |
| Mini End Mill long 4mm | € 11.49 (ex. vat) |
| Mini End Mill long 4.5mm | € 11.49 (ex. vat) |
| Mini End Mill long 5mm | € 11.49 (ex. vat) |
| Mini End Mill long 5.5mm | € 11.49 (ex. vat) |
| Mini End Mill long 6mm | € 11.49 (ex. vat) |
Corner Radius Endmills TiAIN Coating
The tools improve productivity and reduce costs. A sharp corner of an end mill is its weakest point. The corner radius design strengthens the end mill by reducing chipping and providing longer tool life. In mold applications where ball end mills have traditionally been used, a corner radius end mill will remove more material faster, improving productivity.| 5mm Corner Radius Endmill 2Flute TiAIN Coating | € 14.99 (ex. vat) |
| 6mm Corner Radius Endmill 4Flute TiAIN Coating | € 19.99 (ex. vat) |
Deep Reach Corner Radius Endmills
Deep reach tools with long flute length. Intended for applications where a normal tool is not long enough. The corner radius design strengthens the end mill by reducing chipping and providing longer tool life. In mold applications where ball end mills have traditionally been used, a corner radius end mill will remove more material faster, improving productivity.| Deep Reach Corner Radius Endmill 3.00mm | € 15.99 (ex. vat) |
| Deep Reach Corner Radius Endmill 4.00mm | € 17.99 (ex. vat) |
| Deep Reach Corner Radius Endmill 5.00mm | € 19.99 (ex. vat) |
| Deep Reach Corner Radius Endmill 6.00mm | € 24.99 (ex. vat) |
Indexable Endmills
These indexable endmills work very well in steel and also cast iron. When doing modifications to the BF20 and BF30 cast iron parts we use these cutters.The different diameter mills all use the samee insert (except the 30mm). So you only need to stock one type of inserts.| 10mm Indexable Endmill + 10 inserts + Torxtool | € 65.99 (ex. vat) |
| 12mm Indexable Endmill + 10 inserts+ Torxtool | € 65.99 (ex. vat) |
| 16mm Indexable Endmill + 10 inserts+ Torxtool | € 67.99 (ex. vat) |
| 20mm Indexable Endmill + 10 inserts+ Torxtool | € 72.99 (ex. vat) |
| 25mm Indexable Endmill + 10 inserts+ Torxtool | € 72.99 (ex. vat) |
| 30mm RoundDowel Indexable Endmill + 10 inserts+ Torxtool | € 41.97 (ex. vat) |
| 10 x Extra Inserts Indexable Endmills 10,12,16,20,25mm | € 40.33 (ex. vat) |
| 10 x Extra Inserts 30mm RoundDowel Indexable Endmills 30mm | € 29.37 (ex. vat) |
Extra long mill with relieved shaft
Solid carbide mill with extra-long and relieved shaft. The diameter of the relieved part of the shaft is smaller than the tool tip and the rest of the shaft, so the shaft won’t touch the material when milling.| Extra long mill with relieved shaft 8.00mm | € 64.99 (ex. vat) |
Shopping cart
 | 1x | Mini Mill 1 flute 0.50mm | € 9.99 |
| Subtotal: | € 9.99 | ||
| Delivery price: | € 8.77 | ||
| Subtotal (ex. vat): | € 18.76 | |
Ship to(Delivery weight: 7 g)
Order FAQBreaking news
2012-11-17
NEW PRODUCT Mini Mill Spiral Patterned
Tool designed for milling glas and epoxy based materials2012-10-11
NEW PRODUCT Closed Loop Stepper Systems
A lowcost alternative to a servo system2012-06-30
New Bulk Discount
New Bulk Discount feature added to DamenCNC website
We supply worldwide!
