QTC Motor HSK32C

Quick Tool Changer C41/47-C-DB-HSK32C-2.2KW-18000-24000RPM

Quick Tool Changer C41/47-C-DB-HSK32C-2.2KW-18000-24000RPMFor years we have been selling TeknoMotor high speed milling motors with a manual tool changing system, where the milling tool is placed directly into the ER collet in the spindel nose. This is a lowcost solution, and can work fine if you don't have to do many toolchanges. Later we launched the ATC system, Automatic Tool Changer...
Quick Tool Changer C41/47-C-DB-HSK32C-2.2KW-18000-24000RPM
1,499.99Añadir a la cesta (sin IVA)configurator

HSK32-C Toolholder ER16

HSK32-C Toolholder ER16High Quality low run-out toolholder that fits the HSK32-C type of cone that is on the TeknoMotor QTC motor. These toolholders are balanced for use up to 25000RPM, and to the G2,5 value. We have them in several collet sizes, the one presented here is for collet size ER16, we also have them in stock for ER20 and ER25...
Guhring HSK32-C Toolholder ER16
119.99Añadir a la cesta (sin IVA)

HSK32-C Toolholder ER20

HSK32-C Toolholder ER20High Quality low run-out toolholder that fits the HSK32-C type of cone that is on the TeknoMotor QTC motor. These toolholders are balanced for use up to 25000RPM, and to the G2,5 value. We have them in several collet sizes, the one presented here is for collet size ER20, we also have them in stock for ER16 and ER25...
Guhring HSK32-C Toolholder ER20
119.99Añadir a la cesta (sin IVA)

HSK32-C Toolholder ER25

HSK32-C Toolholder ER25High Quality low run-out toolholder that fits the HSK32-C type of cone that is on the TeknoMotor QTC motor. These toolholders are balanced for use up to 25000RPM, and to the G2,5 value. We have them in several collet sizes, the one presented here is for collet size ER25, we also have them in stock for ER16 and ER20...
Guhring HSK32-C Toolholder ER25
119.99Añadir a la cesta (sin IVA)

HSK 32 Taper Spindle Wiper

HSK 32 Taper Spindle WiperUsed to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.
HSK 32 Taper Spindle Wiper
49.99 (sin IVA)

QTC Torque Wrench 3 Nm

QTC Torque Wrench 3 NmWe include this torque wrench with the TeknoMotor QTC C41/47 free of charge. Its preset to the correct torque value of 3.0Nm. It is only lised here in case you lose the one included with the motor and need a spare.
QTC Torque Wrench 3 Nm
24.99 (sin IVA)

Configurator