Acoplamientos de control de movimiento
Shaft Coupler Elastic
Elastic coupler will take out any misalignment between steppermotors and axis. Can handle up to 3NM. Available in several sizes and interchangable. So for example a transition coupling between 6.35mm and 8mm can be made.| Single Unit bore 5.00 mm | € 18.99 (sin IVA)  |
| Single Unit bore 6.35mm | € 13.49 (sin IVA) |
| Single Unit bore 8mm | € 13.49 (sin IVA) |
| Single Unit bore 10mm | € 13.49 (sin IVA) |
| Single Unit bore 12 mm | € 13.49 (sin IVA) |
Shaft Coupler Zero Backlash ADS DCNC-D32-L32
When using ballscrews we recommend to use these shaftcouplings. Since they are backlash free, they match in terms of performance with ballscrews. The rated torque is 12,5Nm so in theory it could be used with our 12nm motor. In practice we use this coupling for the smaller motors Nema 23 0,5nm to 2,5nm or the NEMA34 4,5nm motor. It is possible to make combinations of different shaft sizes...| DCNC-D32-L32_B6.00 (2 HUBS+SPIDER(red)) | € 31.89 (sin IVA) |
| DCNC-D32-L32_B6.35 1/4Inch (2 HUBS+SPIDER(red)) | € 31.89 (sin IVA) |
| DCNC-D32-L32_B7.00 (2 HUBS+SPIDER(red)) | € 31.89 (sin IVA) |
| DCNC-D32-L32_B8 (2 HUBS+SPIDER(red)) | € 31.89 (sin IVA) |
| DCNC-D32-L32_B10 (2 HUBS+SPIDER(red)) | € 31.89 (sin IVA) |
| DCNC-D32-L32_B12 (2 HUBS+SPIDER(red)) | € 31.89 (sin IVA) |
| DCNC-D32-L32_B14 (2 HUBS+SPIDER(red)) | € 31.89 (sin IVA) |
| SPIDER DCNC-D32-L32 (A-red) 98Sh A (high damping) | € 5.91 (sin IVA) |
| SPIDER DCNC-D32-L32 (B-green) 64Sh D(high torsionalstiffness) | € 11.49 (sin IVA) |
| SPIDER DCNC-D32-L32 (C-yellow) 98Sh A (very high damping) | € 11.49 (sin IVA) |
| HUB ShaftCoupler DCNC-D32-L32_B0.0 | € 12.99 (sin IVA) |
| HUB ShaftCoupler DCNC-D32-L32_B6.0 | € 12.99 (sin IVA) |
| HUB ShaftCoupler DCNC-D32-L32_B6.35 | € 12.99 (sin IVA) |
| HUB ShaftCoupler DCNC-D32-L32_B7.00 | € 12.99 (sin IVA) |
| HUB ShaftCoupler DCNC-D32-L32_B8.00 | € 12.99 (sin IVA) |
| HUB ShaftCoupler DCNC-D32-L32_B10.00 | € 12.99 (sin IVA) |
| HUB ShaftCoupler DCNC-D32-L32_B12.00 | € 12.99 (sin IVA) |
| HUB ShaftCoupler DCNC-D32-L32_B14.00 | € 12.99 (sin IVA) |
Shaft Coupler Zero Backlash ADS
These are very high quality servo backlash couplings. They can take up very high torque and have zero backlash. We use them in retrofits when large 4,5nm or 12nm motors are used in a direct drive form with a ballscrew. These are clamp type couplings. See the PDF manual or the DXF files for technical details. | DCNC-D40-L65_B08 (2HUBS+SPIDER(RED)) | € 39.45 (sin IVA) |
| DCNC-D40-L65_B10 (2HUBS+SPIDER(RED)) | € 39.45 (sin IVA) |
| DCNC-D40-L65_B12 (2HUBS+SPIDER(RED)) | € 39.45 (sin IVA) |
| DCNC-D40-L65_B12,7 1/2 Inch (2HUBS+SPIDER(RED)) | € 39.45 (sin IVA) |
| DCNC-D40-L65_B14 (2HUBS+SPIDER(RED)) | € 39.45 (sin IVA) |
| DCNC-D40-L65_B19 (2HUBS+SPIDER(RED)) | € 39.45 (sin IVA) |
| Spider DCNC-D40-L65 (A-red) 98Sh A (High Damping) | € 9.47 (sin IVA) |
| HUB Shaftcoupler DCNC-D40-L65-B08 | € 14.99 (sin IVA) |
| HUB Shaftcoupler DCNC-D40-L65-B10 | € 14.99 (sin IVA) |
| HUB Shaftcoupler DCNC-D40-L65-B12 | € 14.99 (sin IVA) |
| HUB Shaftcoupler DCNC-D40-L65-B14 | € 14.99 (sin IVA) |
| HUB Shaftcoupler DCNC-D40-L65-B19 | € 14.99 (sin IVA) |
| Customize Bore (specify size in remarks) | € 14.99 (sin IVA) |
Su cesta
 | 1x | HUB ShaftCoupler DCNC-D32-L32_B6.35 | € 12.99 |
| Total parcial: | € 12.99 | ||
| Gastos de envío: | € 8.77 | ||
| Total parcial (sin IVA): | € 21.76 | |
Entrega mi paquete a:(Peso de su paquete: 88 g)
Preguntas frecuentesÚltimas noticias
2012-11-17
NEW PRODUCT Mini Mill Spiral Patterned
Tool designed for milling glas and epoxy based materials2012-10-11
NEW PRODUCT Closed Loop Stepper Systems
A lowcost alternative to a servo system2012-06-30
No translation.
No translation.
¡Envío al mundo entero!
