Connecteurs

M12 4-pole Straight Male Connector ( RSC 4/7 )

M12 4-pole Straight Male Connector ( RSC 4/7 )These connectors are compatible with our plug and play sensor system that is used in the RTR sets. This connector is intended for those who which to connect other sensors than we supply, or to make custom cable lengths. The connectors are high quality screw type connectors, which makes the connection quite easy.
M12 4-pole Straight Male Connector ( RSC 4/7 )
7.99Add to shopping cart (sans TVA)

M12 4-pole Straight Female Connector (RKC 4/7)

M12 4-pole Straight Female Connector (RKC 4/7)These connectors are compatible with our plug and play sensor system that is used in the RTR sets. This connector is intended for those who which to connect other sensors than we supply, or to make custom cable lengths. The connectors are high quality screw type connectors, which makes the connection quite easy.
M12 4-pole Straight Female Connector (RKC 4/7)
7.99Add to shopping cart (sans TVA)

M12 4-pole Angle Male Connector (RSCW 4-7)

M12 4-pole Angle Male Connector (RSCW 4-7)These connectors are compatible with our plug and play sensor system that is used in the RTR sets. This connector is intended for those who which to connect other sensors than we supply, or to make custom cable lengths. The connectors are high quality screw type connectors, which makes the connection quite easy.
M12 4-pole Angle Male Connector (RSCW 4-7)
7.99Add to shopping cart (sans TVA)

M12 4-pole Angle Female Connector (RKCW 4/7)

M12 4-pole Angle Female Connector (RKCW 4/7)These connectors are compatible with our plug and play sensor system that is used in the RTR sets. This connector is intended for those who which to connect other sensors than we supply, or to make custom cable lengths. The connectors are high quality screw type connectors, which makes the connection quite easy.
M12 4-pole Angle Female Connector (RKCW 4/7)
7.99Add to shopping cart (sans TVA)

IPS Panel Mount with wiring

IPS Panel Mount with wiringM12 Micro Receptacle, 4-pole, female for front mounting, 24 and 22 AWG, panel mount thread PG9, 0.5 meter leads.
M12 4-poles Panel Mount Female 0,5m wires
11.99 (sans TVA)configurator

M12 3 Pole Cable Connector Straight (ScrewType)

M12 3 Pole Cable Connector Straight (ScrewType)M12 MALE connector, 3-pole, dual keyway with threaded RKC 3U joint, assembling with screw terminals. We often use these for connecting servomotor or steppermotor brakes. The connector does not fit the M12 4 pole, so there is no risk of accidental plugging into a sensor connector.
M12 3-poles Straight Male (RSC 3U/7)
9.99Add to shopping cart (sans TVA)configurator

M12 3 Pole Female Cable Connector Straight (ScrewType)

M12 3 Pole Female Cable Connector Straight (ScrewType)M12 FEMALE connector, 3-pole, dual keyway with threaded RKC 3U joint, assembling with screw terminals. We often use these for connecting servomotor or steppermotor brakes. The connector does not fit the M12 4 pole, so there is no risk of accidental plugging into a sensor connector.
M12 3-poles Straight Female (RKC 3U/7)
9.99Add to shopping cart (sans TVA)configurator

M12 3 pole Panel Mount with wiring

M12 3 pole Panel Mount with wiringM12 FEMALE Panelconnector, 3-pole, dual keyway with threaded RKC 3U joint. 50cm wiring included. We often use these for connecting servomotor or steppermotor brakes. The connector does not fit the M12 4 pole, so there is no risk of accidental plugging into a sensor connector.
M12 3 pole Panel Mount with 50cm wiring (RKF 3U/0,5m)
9.99Add to shopping cart (sans TVA)configurator

HD 3+PE Female Cable Connector Circular Connector

HD 3+PE Female Cable Connector Circular ConnectorCes connecteurs sont pour l'environnement approximatif. Nous préférons ces connecteurs parce qu'ils sont très robustes. Un grand plus le point est celui pour (3+PE) le son un connecteur de vis, qui épargne beaucoup d'heure de soudure.
HD 3+PE Female Cable Connector Circular Connector
6.99Add to shopping cart (sans TVA)

HD 3+PE Male Cable Connector Circular Connector

HD 3+PE Male Cable Connector Circular ConnectorThese heavy duty circular connectors are a robust solution for industrial environments. These connectors feature 4 screw terminals (3 + PE), which reduces the need of soldering.
HD 3+PE Male Cable Connector Circular Connector
6.99Add to shopping cart (sans TVA)

HD 3+PE Female Panel Connector

HD 3+PE Female Panel ConnectorThese heavy duty circular connectors are a robust solution for industrial environments. These connectors feature 4 screw terminals (3 + PE), which reduces the need of soldering.
HD 3+PE Female Panel Connector
5.99Add to shopping cart (sans TVA)

HD 3+PE Male Panel Connector

HD 3+PE Male Panel ConnectorThese heavy duty circular connectors are a robust solution for industrial environments. These connectors feature 4 screw terminals (3 + PE), which reduces the need of soldering.
HD 3+PE Male Panel Connector
5.99Add to shopping cart (sans TVA)

M16 5 Pole Male Connector

M16 5 Pole Male ConnectorA high quality connector, which is easy to solder. Further it can be secured to the bus with thread.
M16 5 Pole Male Connector
7.99Add to shopping cart (sans TVA)

M16 5 Pole Female Connector

M16 5 Pole Female ConnectorA high quality connector, which is easy to solder. Further it can be secured to the bus with thread.
M16 5 Pole Female Connector
7.99Add to shopping cart (sans TVA)

M16 5-pole Female Panel Connector

M16 5-pole Female Panel Connector5 Pole DIN BUS secured, which is easier to solder than the 5 Pole DIN BUS. Further the connector can be secured with thread.
M16 5-pole Female Panel Connector
4.99Add to shopping cart (sans TVA)

M16 5-pole Male Panel Connector

M16 5-pole Male Panel Connector
5.99Add to shopping cart (sans TVA)

M16 7 Pole Female Connector

M16 7 Pole Female ConnectorM16 connector that is used on ECOCAM EOT-3 for the electronics and oscillation motor. Ofcourse it can be used for other applications, but this is the reason why we have it in stock.
M16 7 Pole Female Connector
8.49Add to shopping cart (sans TVA)

M16 8 Pole Female Connector

M16 8 Pole Female ConnectorM16 connector that is used on ECOCAM EOT-3 for the electronics and oscillation motor. Ofcourse it can be used for other applications, but this is the reason why we have it in stock.
M16 8 Pole Female Connector
8.99Add to shopping cart (sans TVA)

Sub-D 9p -> 10p screw terminal male

Sub-D 9p -> 10p screw terminal maleThis Sub-D to terminal block adapter is made for special industrial application e.g. for connecting single wires with open cable heads, or converting Sub-D to single wires.
Sub-D 9p -> 10p screw terminal male
7.99Add to shopping cart (sans TVA)

Sub-D 9p -> 10p screw terminal female

Sub-D 9p -> 10p screw terminal femaleThis Sub-D to terminal block adapter is made for special industrial application e.g. for connecting single wires with open cable heads, or converting Sub-D to single wires.
Sub-D 9p -> 10p screw terminal female
7.99Add to shopping cart (sans TVA)

Sub-D 25p -> 27p screw terminal male

Sub-D 25p -> 27p screw terminal maleThis Sub-D to terminal block adapter is made for special industrial application e.g. for connecting single wires with open cable heads, or converting Sub-D to single wires.
Sub-D 25p -> 27p screw terminal male
14.99Add to shopping cart (sans TVA)

Sub-D 25p -> 27p screw terminal female

Sub-D 25p -> 27p screw terminal femaleThis Sub-D to terminal block adapter is made for special industrial application e.g. for connecting single wires with open cable heads, or converting Sub-D to single wires.
Sub-D 25p -> 27p screw terminal female
14.99Add to shopping cart (sans TVA)

SUB-D Screw Terminal 9 pole MALE

SUB-D Screw Terminal 9 pole MALEWe often use these connector to connect encoder cables. Although at first sight it seems to be an expensive connector, when you take into account that it is much easier to connect than a solder connection. And also much less fault prone, and easy to maintain. Also standard it has a metalised shell, and easy shielding connection, which makes it very well EMC prone...
9 pole MALE
26.99 (sans TVA)

SUB-D Screw Terminal 9 pole FEMALE

SUB-D Screw Terminal 9 pole FEMALEWe often use these connector to connect encoder cables. Although at first sight it seems to be an expensive connector, when you take into account that it is much easier to connect than a solder connection. And also much less fault prone, and easy to maintain. Also standard it has a metalised shell, and easy shielding connection, which makes it very well EMC prone...
9 pole FEMALE
26.99 (sans TVA)

D-SUB (solder cups) 9 pole MALE

D-SUB (solder cups) 9 pole MALEA standard SUB-D connector. Often used for making simple connections. We also have covers for the SUB-D connectors.
D-SUB (solder cups) 9 pole MALE
0.80Add to shopping cart (sans TVA)configurator

D-SUB (solder cups) 25 pole FEMALE

D-SUB (solder cups) 25 pole FEMALEA standard SUB-D connector. Often used for making simple connections. We also have covers for the SUB-D connectors.
D-SUB (solder cups) 25 pole FEMALE
1.80Add to shopping cart (sans TVA)configurator

D-SUB (solder cups) 25 pole MALE

D-SUB (solder cups) 25 pole MALE
1.40Add to shopping cart (sans TVA)configurator

D-SUB (solder cups) 9 pole FEMALE

D-SUB (solder cups) 9 pole FEMALE
0.80Add to shopping cart (sans TVA)configurator

D-SUB cover 9 Pole

D-SUB cover 9 PoleUne couverture qui peut être utilisée en combination avec les connecteurs Secondaires-d. Notez svp, il ne travaillera pas en combination avec le ruban aux connecteurs de SUB-D.
D-SUB cover 9 Pole
1.29 (sans TVA)

D-SUB cover 25 Pole

D-SUB cover 25 Pole
1.49 (sans TVA)

D-SUB (solder cups) 44 pole MALE high density

D-SUB (solder cups) 44 pole MALE high densityType of connector used on many Stepper and Servo systems as the data connector. For example on the high voltage closed loop systems from Leadshine. Also its used on the Delta ASDA-B2 systems
D-SUB (solder cups) 44 pole MALE high density
12.99 (sans TVA)configurator

Sub-D to Ribbon Cable connectors

10 PoleRibbon to 9 pole SUB-D connector MALE
1.42 (sans TVA)configurator
10 PoleRibbon to 9 pole SUB-D connector FEMALE
1.42 (sans TVA)configurator
26 PoleRibbon to 25 pole SUB-D connector MALE
2.99 (sans TVA)configurator
26 PoleRibbon to 25 pole SUB-D connector FEMALE
2.99 (sans TVA)configurator

Ribbon Cable Connectors Male

Ribbon Cable Connectors MaleWe use this connector, to make cables for the Delta VFD-E display. Its not a 100% perfect connector, as the connector is a litle but too wide to fit into the back of the display. It needs to be altered with a knive, to make it fit.
10 pole MALE ribbon connector
4.99 (sans TVA)

Ribbon Cable

10 Pole Ribbon Cable 1 Meter€ 1.00 p/m (sans TVA)
€ 0.00 p/cut (sans TVA)
mm (min: 1000mm, max: 30000mm)

configurator
40 Pole Ribbon Cable 1 meter€ 3.00 p/m (sans TVA)
€ 0.00 p/cut (sans TVA)
mm (min: 1000mm, max: 30000mm)


26 Pole Ribbon Cable / Price per meter

26 Pole Ribbon Cable / Price per meterThis type of ribbon cable is often used in hobby CNC controllers. To make connections between LPT and the CNC interface. We dont use it as much here at DamenCNC, since we mainly work with EdingCNC (former USBCNC) and then the ethernet versions.
26 Pole Ribbon Cable 1 Meter€ 2.50 p/m (sans TVA)
€ 0.00 p/cut (sans TVA)
mm (min: 1000mm, max: 30000mm)

configurator

Ribbon Cable Crimp Tool

Ribbon Cable Crimp ToolWhen working with USBCNC, many connections are made with ribbon cable. We have been selling the connectors and cable for years. Many people use a workbench vise to make the crimp connection. Often this gives problems. Most common is to over tighten and then break the connector. Other common problem is misalignment of the connector and cable...
Ribbon Cable Crimp Tool
24.95 (sans TVA)

10 Pole Ribbon FEMALE Cable Connector

10 Pole Ribbon FEMALE Cable Connector10 Pole ribbon cable is used to connect the Steppermotor drivers to the USBCNC or Mach 3 interface. 26 Pole ribbon cable is used to make LPT poort connections for Mach 3 systems.
10 Pole Ribbon FEMALE Cable Connector
0.30Add to shopping cart (sans TVA)configurator

20 Pole Ribbon FEMALE Cable Connector

20 Pole Ribbon FEMALE Cable ConnectorThis type of connector is used on many EdingCNC (former USBCNC) products. For example to connect the IO card to the CPU 5B.
20 Pole Ribbon FEMALE Cable Connector
0.80 (sans TVA)configurator

26 Pole Ribbon FEMALE Cable Connector

26 Pole Ribbon FEMALE Cable ConnectorThis type of connector is often used to make D-SUB to Ribbon connectors. (MACH 3 type interfaces)
26 Pole Ribbon FEMALE Cable Connector
0.80Add to shopping cart (sans TVA)configurator

Pluggable Screw Terminal

Pluggable Screw TerminalThis type of connector is often used in Leadshine and other stepperdrivers. We also often use it in projects. We also have the PCB contra mount in our stock, in case you are using it in your own design.
2 Pole (pitch 5.08mm) connector
1.80Add to shopping cart (sans TVA)
6 Pole (pitch 5.08mm) connector
5.00Add to shopping cart (sans TVA)

Pluggable Terminal PIT

Pluggable Terminal 3 Pole (pitch 5.08mm) PIT connector
4.20Add to shopping cart (sans TVA)
Pluggable Terminal 6 Pole (pitch 5.08mm) PIT connector
6.00Add to shopping cart (sans TVA)

5 pole connector & bus +wiring

5 pole connector & bus +wiringThis is the type of connector we use in our RTR sets. Its a quality connector that has some nice features. No soldering is required since its a screw connector. The bus has been prewired with 40CM of wire. Its possible to fixate the connector to the bus with locking screws. We can offer these directly from our stock.
5PoleConnector & PrewiredBus
9.99Add to shopping cart (sans TVA)

Neutrik Panelmount USB

Neutrik Panelmount USBReversible USB 2.0 gender changer (type A and B), Nickel D-housing Due to the rising digitisation the interface problems between audio/video networks, IT equipment, MP3 camcorders, etc. increase. A rugged solution is needed. Neutrik's reversible USB gender changer, mounted in the standardized D-shape housing, and the rugged patch cables solve this problem.
Neutrik Panelmount USB
9.99Add to shopping cart (sans TVA)configurator

Neutrik Panelmount RJ45 Ethernet

Neutrik Panelmount RJ45 EthernetRJ45 feedthrough receptacle, D-shape metal flange with the latch lock, mounting screws included The etherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry...
Neutrik Panelmount RJ45 Ethernet
15.99Add to shopping cart (sans TVA)configurator

Neutrik Panelmount HDMI

Neutrik Panelmount HDMINous utilisons souvent ces connecteurs dans nos propres projets. Il s'agit d'un connecteur industriel très robuste. Lorsque vous utilisez les connecteurs corrects contre, il est parfaitement blindé CEM.
Neutrik Panelmount HDMI
15.99Add to shopping cart (sans TVA)configurator

NEUTRIK - SCDX - COVER

Neutrik SCDX cover black
1.99Add to shopping cart (sans TVA)

Sub-D Mount Screw Set

Sub-D Mount Screw SetThe Sub-D mounts on the back of your PC and those used in our controllers dont have metric but UNC thread. When building housings its important to use the correct UNC bolts otherwise the thread will be damaged. Here we offer a set of 2 bolts,nuts,rings, in the correct 4-40 UNC thread.
Sub-D Mount Screw Set One Set
1.99Add to shopping cart (sans TVA)

Hex Long Nut 4-40 UNC L=6.3mm (Set of 2)

Hex Long Nut 4-40 UNC L=6.3mm (Set of 2)When joining to D-sub connectors, for example when you have 2 serial kabels. These nuts can be added in between, to secure the connectors properly.
Hex Long Nut 4-40 UNC L=6.3mm (Set of 2)
1.60Add to shopping cart (sans TVA)

powerCON 32 A chassis connector, power-in

powerCON 32 A chassis connector, power-inThe 32 A powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations...
powerCON 32 A chassis connector, power-in
8.99 (sans TVA)configurator

PowerCON 32 A cable connector

PowerCON 32 A cable connector The 32 A powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations...
PowerCON 32 A cable connector
19.99 (sans TVA)configurator

Neutrik NAC3FX-W locking female cable connector

Neutrik NAC3FX-W locking female cable connectorLocking female cable connector, screw terminals The powerCON TRUE1 is a locking waterproof 16 A true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 is a connector with breaking capacity (CBC), i.e...
Neutrik NAC3FX-W locking female cable connector
9.99 (sans TVA)

Neutrik NAC3MPX Appliance inlet connector

Neutrik NAC3MPX Appliance inlet connectorAppliance inlet connector, 1/4'' flat tab terminals The powerCON TRUE1 is a locking 16 A true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.
Neutrik NAC3MPX Appliance inlet connector
4.99 (sans TVA)configurator

Neutrik NAC3FPX Appliance Outlet Connector

Neutrik NAC3FPX Appliance Outlet Connector Appliance outlet connector, 1/4'' flat tab terminals The powerCON TRUE1 is a locking 16 A true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.
Neutrik NAC3FPX Appliance Outlet Connector
5.99 (sans TVA)

RSKF 9 PANEL NUT, M12 MALE/FEMALE RECEPTACLE CONN

RSKF 9  PANEL NUT, M12 MALE/FEMALE RECEPTACLE CONNM12 Micro PG 9 panel nut for male and female receptacles.
RSKF 9 PANEL NUT, M12 MALE/FEMALE RECEPTACLE CONN
0.60 (sans TVA)

Configurator