Accessoires USBCNC en général
MPG Handwheel
This is one of the most handy add-ons we sell for USBCNC. Since we have got so many positive responses to the product we include it as a standard item when we supply the Performance version of our Ready to Run set. The product can be used in 2 sections of the software. It was intended for use to jog the machine, when you enter the jog menu of the USBCNC software (shortkeys f12,f9,f9)...
| MPG Handwheel | € 169.99 (sans TVA)  |
CPU/Sensor Holder
This is a product that has been developed for our RTR CNC controllers. It’s a device that protects the inputs of the USBCNC CPU (4&5b) and allows sensors of almost any type to be easily connected, using industry standard m12 sensor connectors. When a short circuit is made or if an incorrect voltage is attached, only the optocoupler will be broken...| CPU/Sensor Holder | € 139.99 (sans TVA) |
RTR Relays module (Tool Flood)
We use this module in all our RTR controllers. It has two 230V solid state relays. These relays are most often used used to switch a KRESS milling motor(Tool) and a coolant pump(Flood). The module interfaces with USBCNC CPU V4 or V5, via a ribbon cable. On the PCB there are 2 jumpers allowing you to choose which signal from USBCNC controls the relays...| RTR Relays module (Tool Flood) | € 69.99 (sans TVA) |
0-10V Spindle Speed Control V2 CPU V4/V5B
| 0-10V Output Spindle Speed Control V2 | € 69.99 (sans TVA) |
0-10V Spindle Speed Control CPU V4/V5B
These parts are plug and play with USBCNC. They are designed in such a manner that they will work with CPU V3 V4 and V5B | 0-10V Output Spindle Speed Control(NOT IN STOCK) | € 69.99 (sans TVA) |
10 Pole Ribbon -->> screw terminal interface
Les interfaces ont USBCNC connecteurs de câble ruban. Ces travaux très bien avec tous nos périphériques Plug and Play. Mais parfois, une connexion personnalisée doit être faite. Puis ce ruban à visser interface du terminal est un excellent produit. Il rend le câblage beaucoup plus facile.| 10 Pole Ribbon -->> screw terminal interface | € 12.99 (sans TVA) |
10 Pole Ribbon -->> Signal Multiplier
The USBCNC interfaces have ribbon cable connectors. These work very well with all our plug and play devices. But sometimes one of the outputs on the USBCNC board needs to be used multiple times. In that case this signal multiplier is a nice product. It allows one ribbon cable connection to be duplicated 3 times. | 10 Pole Ribbon -->> Signal Multiplier | € 9.99 (sans TVA) |
26PoleRibbon -->>SUB-D-->>screw terminal interface
This is a handy device we often use for testing equipment. It has several features integrated in one product. We most often use it for easy connection of wiring to ribbon cables(10/20/26 pole). But it also has gender changer for 25 pole SUB-D connectors. It can be combined with USBCNC CPU5A for more easy connection than the normal solder connection.| 26 Pole Ribbon -->> SUB-D-- >> screw terminal interface | € 25.99 (sans TVA) |
Brake/Relay Module
 Brake_Relay Module.jpg)
Nous utilisons cette carte depuis plusieurs années dans notre contrôle RTR Performance. Il ya un article standard que nous utilisons pour activer / désactiver un frein électro mécanique de nombreuses machines CNC utilisé sur l'axe Z. Toutefois, il est également possible d'utiliser un cavalier pour passer à un autre canal comme outil ou une inondation...| Relay (Brake) Module (12V) | € 19.99 (sans TVA) |
| Relay (Brake) Module (24V) | € 19.99 (sans TVA) |
Driver Compatibility PCB CPU V3 V4 V5B
USBCNC CPU V3 V4 and V5B use 10 pole ribbon cable (flat cable) to make connections to the stepper drives or servo drives. Since often mistakes were made here in wiring, we developed already a few years ago a small PCB that goes into the stepper drive. Then no wiring is needed anymore. All that is needed is a 10 pole ribbon cable between the USBCNC CPU and the stepperdrives...| 5042&5056 Compatibility PCB | € 4.99 (sans TVA) |
| 8078 Compatibility PCB | € 4.99 (sans TVA) |
Driver Compatibility PCB HBS86
USBCNC CPU V3 V4 and V5B use 10 pole ribbon cable (flat cable) to make connections to the stepper drives or servo drives. Since often mistakes were made here in wiring, we developed already a few years ago a small PCB that goes into the stepper drive. Then no wiring is needed anymore. We recently also made this board for the HBS86 closed loop driver...| Driver Compatibility HBS86 | € 5.99 (sans TVA) |
Breaking news
2012-11-17
NEW PRODUCT Mini Mill Spiral Patterned
Tool designed for milling glas and epoxy based materials2012-10-11
NEW PRODUCT Closed Loop Stepper Systems
A lowcost alternative to a servo system2012-06-30
Nouveau remise sur quantité
Nouvelle fonctionnalité Remise en vrac ajoutée au site Web DamenCNC
We supply worldwide!
