Spare Parts

Quick Connector Metal Electronics Box

Quick Connector Metal Electronics BoxThe TeknoMotor C41/47 high speed milling motors, have a plastic electronics box by default. It does not have a connector but is wired direct to the motor. In many applications its better/easier to have a connector. We can get the TeknoMotor made with a quick connector on the motor frame, but then you have to make a choice for the winding, its either Star (380V) or Triangle (230V)...
TeknoMotor Quick Connector Metal Electronics Box (71x71x32mm)
59.99Add to shopping cart (sans TVA)

Electronics Box

Electronics BoxThe electronics box on the TeknoMotors is made from plastic on most models. Since the motor is quite heavy, it is easy to damage the plastic part, when incorrectly handling the motor. In case you accidentally damage the cover. Here we sell the spares.
Electronics Box C3140 (Plastic Black)
6.99 (sans TVA)
Electronics Box C4147 (Plastic Black)
6.99 (sans TVA)

TeknoMotor Terminal Block

TeknoMotor Terminal Block
3.99 (sans TVA)

Terminal Box spares

Terminal Box spares (6 nuts & 3 bridges)
4.99 (sans TVA)

Bearing sets for HF spindels

Bearing sets for HF spindels
Spare set of bearings for C31/40 18000RPM
24.99 (sans TVA)
Spare set of bearings for C41/47-C-SB-P-ER20-2.0KW-18000RPM
24.99 (sans TVA)

Teknomotor Fan Cover

Teknomotor Fan Cover
Teknomotor Fan Cover for C41/47
5.00 (sans TVA)

Teknomotor Fan Cover for ATC

Teknomotor Fan Cover for ATC
Teknomotor Fan Cover for ATC
20.00 (sans TVA)

Spare Fans for HF spindels

Spare Fans for HF spindelsSpare Fans for the HF model TeknoMotors. The electrospindels have a different fan. We dont sell it seperate, since it is balanced with the motor, and cannot be removed/replaced without balancing the motor again.
Spare Fan for HF C2431 24000RPM
4.99 (sans TVA)
Spare Fan for HF C3140 18000RPM
4.99 (sans TVA)
Spare Fan for HF C4147 18000RPM
6.99 (sans TVA)

Spare Fan for ElectroSpindels / DC fan Cooling

Spare Fan for ElectroSpindels / DC fan CoolingElectroSpindels with DC fan cooling have two major advantages: they produce much less noise, and they allow the motor to run at very low RPM while maintaining enough cooling. Downside is, the DC Fan is not designed for the fast, sudden, radial movements of the milling motor in a CNC machine. This decreases the durability of this fan dramatically. Fortunately, this fan is easy to replace.
Spare Fan for ElectroSpindels with DC fan cooling
39.99 (sans TVA)

Spare Fan for ATC

Spare Fan for ATC
124.99 (sans TVA)

M23 Power Connector Female for ATC (Housing/Insert/Contacts)

M23 Power Connector Female for ATC (Housing/Insert/Contacts)
42.99 (sans TVA)configurator

M23 Data Connector Female for ATC (Housing/Insert/Contacts)

M23 Data Connector Female for ATC (Housing/Insert/Contacts)
29.99 (sans TVA)configurator

Configurator