Intense PC

Industrial PC we often use in our CNC projects. It has passive cooling. Which is perfect for CNC, since there is always dust and chips that could get into the fans, and then block cooling. With the Intense PC these issues are over. Also it has a SSD disk, so no moving parts that can break. We have often seen hard disk failures on CNC machines due to vibrations. Thats why we have an SSD disk in this PC, no moving parts means a much lower chance of failure due to vibrations.

Component eigenschappen:
  • Dimensions: 190 x 160 x 40 mm
  • Power Consumption: 9 - 19 Watt
  • Power source unregulated DC 10-16Volt adapter (included)
  • AC-ON functie (automatic restart after power down)
  • CPU: AMD G-T40N 64 bit dual core 1 GHz 9W TDP Intel Celeron 847E 64bit dual core 1.4 GHz 17W TDP
  • Video: HD Graphics 2000
  • HDMI 1.4a Up to 1920 x 1200 @ 60 Hz
  • Display Port: Max. 2560 x 1600 at 60Hz, dual mode support
  • Memory: 2x2GB DDR3-1066, 64-bit (two SO-DIMM sockets)
  • 2x USB 3.0 host ports, 5 Gbit/s
  • 2x USB 2.0 host ports, 480 Mbit/s
  • 4x USB 2.0 host ports, 480 Mbit/s on frontpanel
  • Serial port: Ultra mini serial connector
  • Ethernet: 2* 1000 BaseT Ethernet poorten, RJ45
  • Wlan-WIFI: 802.11b/g/n Wi-Fi, 2 antennas, 150 Mbit/s
  • Harddisk: 60 GB SSD (S-ATA)
  • Internal 2.5 inch SataSlot (occupied bij 60 GB SSD) Two eSATA ports, max. 6 Gbit/s
  • Audio: Stereo line-out and stereo line-in
  • 7.1 channel S/PDIF, (electrical through 3.5mm jack)
  • Operating System: Windows 7 PRO UK
Intense PC
952.99 (excl. btw)configurator