This DIN-Rail opto can be handy when you need to convert signals from 24VDC to for example 5V TTL. This often occurs when working with CNC interfaces like USBCNC/Mach3 etc, since most of those pcbs are 5V TLL. Then most sensors work on 24VDC. Also it protects the vulnerable 5V TTL circuit, since any short circuit in the 24VDC line can never reach the 5V TTL side...
Afsluitplaat , lengte: 63,2 mm, breedte: 2,2 mm, hoogte: 24,3 mm, kleur: grijs
D-PT 1,5/S Quattro Gray Endplate
Plug-in bridge - FBS 5-3,5 - 3213043 (5-pole)
Using the plug in bridges connection can be made between the adjacent terminal blocks. They are available in several different widths.
This model is suitable for PIT 1.5
Plug-in bridge, Pitch: 3.5 mm, Number of positions: 5, Color: red
De Push-In aansluitklemmen PIT zijn in het bijzonder geschikt om zonder gereedschap aders met eindhuls of rechte aders aan te sluiten. Met behulp van de openingstoets kan de klemstrip met elk soort schroevendraaier worden geopend.
DIN Rail according to EN60715 and DIN46277. Its the 15mm high version. We often use it in the HENSEL controller boxes, since the smaller din rails of 7,5mm height bend to easily then. We advise to use this higher Din RAIL when the rails is not supported by the underground/under-laying material.
We often use this DIN rail PCB mount for mounring IO cards or USBCNC CPUS inside a bigger controller cabinet. It is possible to buy a complete set for a Eurocard 100x160mm PCB, or you can buy seperate parts and lengths of profile, to make your own solutions.