BF Floating Ballscrew Support Units (C3 Quality)

The BF Floating Ballscrew Support Units, or used in combination with the BK Fixed Ballscrew Support Units. For example for a BK10 the counterpart is the BF10. The only thing that is a bit confusing, is that a BK10 has a 10mm inside diameter like you would expect, but the BF10 that goes on the floating end has an 8mm bore. Once you know, and have the correct end machining on the ballscrew it's no problem at all.

Component eigenschappen:
  • BF10 to BF20 models Available from stock
  • BF25 to BF40 models available on request (longer leadtimes)
  • Type of support used on the floating side (can only take radial loads)
  • Compatible with BK series Fixed bearing blocks
  • Exchangeable with other brands like THK, NSK, MISUMI, KURODA
  • In this design the bearing is fixed to the ballscrew, and the bearing can move freely in axial direction through the floating housing
BF10_C3 (8mm bore) Floating Ballscrew Support Unit
22.99Toevoegen aan mandje (excl. btw)
BF12_C3 (10mm bore) Floating Ballscrew Support Unit
24.99Toevoegen aan mandje (excl. btw)
BF15_C3 Floating Ballscrew Support Unit
28.99Toevoegen aan mandje (excl. btw)
BF17_C3 Floating Ballscrew Support Unit
35.99Toevoegen aan mandje (excl. btw)
BF20_C3 Floating Ballscrew Support Unit
36.99Toevoegen aan mandje (excl. btw)
BF25_C3 Floating Ballscrew Support Unit
51.99Toevoegen aan mandje (excl. btw)
SF25_C3 Floating Ballscrew Support Unit
65.99 (excl. btw)
CAD bestanden:
Configurator