IGUS DryLin Linear Guide

IGUS DryLin WS10 Single Rail

IGUS DryLin WS10 Single Rail Drylin WS10 profile
DryLin WS10 profile€ 30.99 p/m (excl. btw)
€ 2.00 p/cut (excl. btw)
mm (min: 100mm, max: 4000mm)

configurator

IGUS DryLin WS20 Single Rail

DryLin WS20 profile€ 69.99 p/m (excl. btw)
€ 3.00 p/cut (excl. btw)
mm (min: 100mm, max: 4000mm)

configurator

IGUS Drylin WS10-40

IGUS Drylin WS10-40Drylin WS10-40 profile. Can be used as a linear slide by itself. Often two slides are utilized to make a gantry type of milling machine. In combination with aluminium structural parts its an effective choice of building.
WS10-40 profile€ 45.99 p/m (excl. btw)
€ 3.00 p/cut (excl. btw)
mm (min: 100mm, max: 4000mm)

configurator

IGUS DryLin WS20-80

IGUS DryLin WS20-80Drylin WS10-40 and WS20-80 profile. Can be used as a linear slide by itself. Often two slides are utilized to make a gantry type of milling machine. In combination with aluminium structural parts its an effective choice of building.
WS20-80 profile€ 132.99 p/m (excl. btw)
€ 4.00 p/cut (excl. btw)
mm (min: 100mm, max: 4000mm)

configurator

IGUS DryLin W Pillow Blocks JUM200UM

IGUS DryLin W Pillow Blocks JUM200UM Dit glijlager hoort bij de WS10 en WS10- lineair geleiding profielen. Het drylin systeem is een kost effectieve lineair geleider, het voordeel is dat het niet gesmeed hoeft te worden.
WJ200UM-01-10 for WS10 profile
4.99Toevoegen aan mandje (excl. btw)

IGUS DryLin W Pillow Blocks JUM200UM-01-20

IGUS DryLin W Pillow Blocks JUM200UM-01-20The pillow block which accompanies the WS20 and WS20-80 linear slides. The Drylin system is a cost effective linear slide system which require no lubrication.
WJ200UM-01-20 for WS20 profile
8.99Toevoegen aan mandje (excl. btw)

DryLin® W Linear Guides with adjustable clearance

DryLin® W Linear Guides with adjustable clearanceDryLin® W 'Turn-To-Fit' adjustable carriages allow you to set the clearance for your application by using a set screw. The design also has a unique 'clicking' feature which audibly enables you to hear each revolution - so you can adjust to a set torque level and back off any number of revolutions to achieve your required fit. Currently available only in zinc-cast versions...
WJUME-01-10 Adjustable Clearance
7.99Toevoegen aan mandje (excl. btw)
WJ200UME-01-20 Adjustable Clearance
14.99Toevoegen aan mandje (excl. btw)

WHKA-10 Manual Clamp

WHKA-10 Manual ClampA (light)hand clamp that can be used in combination with the DryLin W system. Do not use in safety devices, since the creep behaviour of plastic will cause the holding force to go down by up to 70% over time.
WHKA-10 Manual Clamp
27.99Toevoegen aan mandje (excl. btw)

IGUS DryLin W Hand Clamp for higher forces

IGUS DryLin W Hand Clamp for higher forcesA hand clamp that can be used in combination with the DryLin W system. Do not use in safety devices, since the creep behaviour of plastic will cause the holding force to go down by up to 70% over time.
WHKD-1010
62.99 (excl. btw)configurator
WHKD-2020
105.99 (excl. btw)configurator

IGUS DryLin W Guide Carriage, assembled

IGUS DryLin W Guide Carriage, assembledVoor beide maten DryLin W rail bieden wij een geleiderplaat. Voor de WS10-40 hebben wij zelf een afdekplaat ontworpen die te combineren is met de bijgeleverde glijlagers. Voor de WS2-80 rail bieden wij de WW-20-80-15 aan, de standaard oplossing van DryLin. Ook hier zijn de glijlagers en bevestiginsbouten bijgeleverd.
DCNC-Drylin cover plate (for WS10-40 rail)
29.99Toevoegen aan mandje (excl. btw)

IGUS Drylin W Guide Carriage, assembled WW-20

IGUS Drylin W Guide Carriage, assembled WW-20For the WS20-80 rail, we offer the WW-20-80-15. Here the pillow blocks and bolts are also included.
WW-20-80-15 (for WS20-80 rail)
62.99Toevoegen aan mandje (excl. btw)

Configurator