Stappenmotoren

DCNC-NEMA23 1.0Nm (IP54)

DCNC-NEMA23 1.0Nm (IP54)This type of steppermotor is produced especially for DamenCNC, according to our specifications. We did not like the normal steppers that were available on the market. These have leads coming out of the motor, requiring soldering, or other termination methods, which are time consuming and error prone. This motor has a screw terminal on the back of the motor. So its very easy to do the wiring...
DCNC-NEMA23 1.0Nm (IP54)
31.99Toevoegen aan mandje (excl. btw)configurator

DCNC-NEMA23 2.0Nm (IP54)

DCNC-NEMA23 2.0Nm (IP54)This type of steppermotor is produced especially for DamenCNC, according to our specifications. We did not like the normal steppers that were available on the market. These have leads coming out of the motor, requiring soldering, or other termination methods, which are time consuming and error prone. This motor has a screw terminal on the back of the motor. So its very easy to do the wiring...
DCNC-NEMA23 2.0Nm (IP54)
49.99Toevoegen aan mandje (excl. btw)configurator

DCNC-NEMA23 2.5Nm (IP54)

DCNC-NEMA23 2.5Nm (IP54)This type of steppermotor is produced especially for DamenCNC, according to our specifications. We did not like the normal steppers that were available on the market. These have leads coming out of the motor, requiring soldering, or other termination methods, which are time consuming and error prone. This motor has a screw terminal on the back of the motor. So its very easy to do the wiring...
DCNC NEMA23 2.5NM (IP54)
52.99Toevoegen aan mandje (excl. btw)configurator

DCNC-NEMA34 4.0Nm (IP54)

DCNC-NEMA34 4.0Nm (IP54)This type of steppermotor is produced especially for DamenCNC, according to our specifications. We did not like the normal steppers that were available on the market. These have leads coming out of the motor, requiring soldering, or other termination methods, which are time consuming and error prone. This motor has a screw terminal on the back of the motor. So its very easy to do the wiring...
DCNC-NEMA34 4.0Nm (IP54)
79.99Toevoegen aan mandje (excl. btw)configurator

DCNC-NEMA34 8.0Nm (IP54)

DCNC-NEMA34 8.0Nm (IP54)This type of steppermotor is produced especially for DamenCNC, according to our specifications. We did not like the normal steppers that were available on the market. These have leads coming out of the motor, requiring soldering, or other termination methods, which are time consuming and error prone. This motor has a screw terminal on the back of the motor. So its very easy to do the wiring...
DCNC-NEMA34 8.0NM (IP54)
109.99Toevoegen aan mandje (excl. btw)configurator

DCNC-NEMA34 12.0Nm (IP54)

DCNC-NEMA34 12.0Nm (IP54)This type of steppermotor is produced especially for DamenCNC, according to our specifications. We did not like the normal steppers that were available on the market. These have leads coming out of the motor, requiring soldering, or other termination methods, which are time consuming and error prone. This motor has a screw terminal on the back of the motor. So its very easy to do the wiring...
DCNC-NEMA34 12.0NM (IP54)
139.99Toevoegen aan mandje (excl. btw)configurator

Stepper Motor DCNC-NEMA8

Stepper Motor DCNC-NEMA8The smallest steppermotor we can offer at the moment. With its 20x20mm flange size, its really a tiny steppermotor. Could be used in robotics, or small devices.
DCNC-NEMA8-0.02NM (200g/cm)
35.99 (excl. btw)

Stepper Motor DCNC-NEMA11

Stepper Motor DCNC-NEMA11The second smallest steppermotor we can offer at the moment. With its 28x28mm flange size, its really a tiny steppermotor. Could be used in robotics, or small devices.
Stepper Motor DCNC-NEMA11 (900g/cm)
39.99 (excl. btw)

Stepper Motor DCNC-NEMA17

Stepper Motor DCNC-NEMA17 Een range van standaard NEMA 17 motoren die direct uit voorraad leverbaar zijn. De motoren zijn geselecteerd om goed te werken met de besturingen die we aanbieden. (2A,3D,4D, en HP 5042, HP 5056)
DCNC-NEMA17-0.5NM
21.99Toevoegen aan mandje (excl. btw)configurator

Stepper Motor DCNC-NEMA23

Stepper Motor DCNC-NEMA23 Een range van standaard NEMA 23 motoren die direct uit voorraad leverbaar zijn. De motoren zijn geselecteerd om goed te werken met de besturingen die we aanbieden.
DCNC-NEMA23-1.0NM
29.99Toevoegen aan mandje (excl. btw)configurator
DCNC-NEMA23-2.0NM
46.99Toevoegen aan mandje (excl. btw)configurator
DCNC-NEMA23-2.0NM (Double Shaft)
49.99Toevoegen aan mandje (excl. btw)configurator
DCNC-NEMA23-2.5NM
51.99Toevoegen aan mandje (excl. btw)configurator

Stepper Motor DCNC-NEMA34-4.0NM

DCNC-NEMA34-4.0NM
79.99Toevoegen aan mandje (excl. btw)configurator

Stepper Motor DCNC-NEMA34-4.5Nm (Double Shaft)

Stepper Motor DCNC-NEMA34-4.5Nm (Double Shaft)NEMA 34 4.5Nm stepper motor, but then with a double shaft. The double shaft is often used to mount a mechanical brake on the Z-axis of CNC machines. Other clients use it to mount a handwheel, so the CNC machines can also be manually adjusted. Basicly this type of motor is used, when you need to be able to mount something on the front and back of the motor...
DCNC-NEMA34-4.5NM (Double Shaft)
89.99Toevoegen aan mandje (excl. btw)configurator

Stepper Motor DCNC-NEMA34-12.0NM

Stepper Motor DCNC-NEMA34-12.0NM Een range van standaard NEMA 34 motoren die direct uit voorraad leverbaar zijn. De motoren zijn geselecteerd om goed te werken met de besturingen die we aanbieden.
DCNC-NEMA34-12.0NM
139.99Toevoegen aan mandje (excl. btw)configurator
DCNC-NEMA34-12.0NM (Double Shaft)
164.99Toevoegen aan mandje (excl. btw)configurator

Stepper Motor DCNC-NEMA42

Stepper Motor DCNC-NEMA42A range of standard NEMA 42 motors we can offer (leadtime about 2 to 3 weeks). The motors are selected to work well with the stepperdrivers we offer.
DCNC-NEMA42-12.0NM
259.99 (excl. btw)configurator
DCNC-NEMA42-20.0NM
309.99 (excl. btw)configurator
DCNC-NEMA42-28.0NM
379.99 (excl. btw)configurator

Configurator