Vacuum Table VT4530 SEAL2

This vacuum table series is an advanced version of the ST vacuum table. A 8 mm strong aluminum plate at the bottom of the vacuum table provides extra stability. This aluminum plate allows to fix the vacuum table on the most T-Slot grids. First you have to fix the aluminum plate on the T-Slot plate, then you can fix the vacuum table on the aluminium plate. That provides a very solid setup over the entire area of the table. The ultimate vacuum table for wet and dry machine-milling. We suggest to put our vacuum tables on line together with a suitable vacuum pump. We developed a special connection adapter with an adjustable calibre of approximately 1" - 1.75". With that adapter you can, of course, use an ordinary vacuum cleaner as a "vacuum pump" - just as you like. Moreover each module can be switched on or off by a valve or ball valve individually. The retaining force is proportional to covered area, the coefficient of friction and the pressure differential. In order to increase the coefficient of friction a hole rubber mat is within our shipment. This mat serves as a protection for the vacuum plate and if you work pieces need to be countersunk. Hole rubber mats are wearing parts! You can order such mats in our shop reasonably priced.

Component eigenschappen:
  • Scope of delivery:
  • Vacuum-clamping unit VT4530SEAL2
  • Connection-adapter and hoses
  • Rubber cover mat (for covering unused holes)
  • Spanner for connection adapter
  • Technical data:
  • Material: Aluminium, Polyethylen
  • Dimensions: 460 x 300 mm
  • Clamping area: 450 x 300 mm
  • Height: 29 mm
  • Size of drilled holes: 0.3 mm
  • Holegrid: 10 x 10 mm
  • Hose connections: 10 mm
  • Adaptermat: hole rubber mat
Vacuum Table VT4530 SEAL2
153.99 (excl. btw)configurator
Configurator