ATC Motor ISO30

TeknoMotor with Toolchanger ATC71-A-ISO30-SN

TeknoMotor with Toolchanger ATC71-A-ISO30-SNThe electrospindles series ATC71 have been designed to develop high power with limited overall dimensions. This type of electrospindle is suitable to be installed on automatic machines for machining wood, aluminum and plastics. Thanks to the stiffness of the mechanical components, the speed of tool changing and the quality of electrical components of this electrospindle...
ATC71-A-ISO30-SN S1 3.8Kw s64.6Kw at 200Hz 12000rpm, max 400Hz 24000rpm, 380V
3,099.99Toevoegen aan mandje (excl. btw)configurator

TeknoMotor with Toolchanger ATC71-A-ISO30-LN

TeknoMotor with Toolchanger ATC71-A-ISO30-LNThe electrospindles series ATC71 have been designed to develop high power with limited overall dimensions. This type of electrospindle is suitable to be installed on automatic machines for machining wood, aluminum and plastics. Thanks to the stiffness of the mechanical components, the speed of tool changing and the quality of electrical components of this electrospindle...
ATC71-A-ISO30-LN S1 3.8Kw s64.6Kw at 200Hz 12000rpm, max 400Hz 24000rpm, 380V
3,299.99Toevoegen aan mandje (excl. btw)configurator

TeknoMotor with Toolchanger ATC71-B-ISO30

TeknoMotor with Toolchanger ATC71-B-ISO30The electrospindles series ATC71 have been designed to develop high power with limited overall dimensions. This type of electrospindle is suitable to be installed on automatic machines for machining wood, aluminum and plastics. Thanks to the stiffness of the mechanical components, the speed of tool changing and the quality of electrical components of this electrospindle...
ATC71-B-ISO30-SN S1 5.5Kws6 6.7Kw at 200Hz 12000rpm, max 400Hz 24000rpm, 380V
3,199.99Toevoegen aan mandje (excl. btw)configurator

TeknoMotor with Toolchanger ATC71-B-ISO30-LN

TeknoMotor with Toolchanger ATC71-B-ISO30-LNThe electrospindles series ATC71 have been designed to develop high power with limited overall dimensions. This type of electrospindle is suitable to be installed on automatic machines for machining wood, aluminum and plastics. Thanks to the stiffness of the mechanical components, the speed of tool changing and the quality of electrical components of this electrospindle...
ATC71-B-ISO30-LN S1 5.5Kws6 6.7Kw at 200Hz 12000rpm, max 400Hz 24000rpm, 380V
3,399.99Toevoegen aan mandje (excl. btw)configurator

TeknoMotor with Toolchanger ATC71-C-ISO30-SN

TeknoMotor with Toolchanger ATC71-C-ISO30-SNThe electrospindles series ATC71 have been designed to develop high power with limited overall dimensions. This type of electrospindle is suitable to be installed on automatic machines for machining wood, aluminum and plastics. Thanks to the stiffness of the mechanical components, the speed of tool changing and the quality of electrical components of this electrospindle...
ATC71-C-ISO30-SN S1 7.5Kws6 9.0Kw at 200Hz 12000rpm, max 400Hz 24000rpm, 380V
3,299.99Toevoegen aan mandje (excl. btw)configurator

TeknoMotor with Toolchanger ATC71-C-ISO30-LN

TeknoMotor with Toolchanger ATC71-C-ISO30-LNThe electrospindles series ATC71 have been designed to develop high power with limited overall dimensions. This type of electrospindle is suitable to be installed on automatic machines for machining wood, aluminum and plastics. Thanks to the stiffness of the mechanical components, the speed of tool changing and the quality of electrical components of this electrospindle...
ATC71-C-ISO30-LN S1 7.5Kws6 9.0Kw at 200Hz 12000rpm, max 400Hz 24000rpm, 380V
3,549.99Toevoegen aan mandje (excl. btw)configurator

ISO 30 Toolholders for ATC

ISO 30 Toolholders for ATCThese toolholders are designed/made for the TeknoMotor ATC. They should also work in HSD ES915 and other ISO30 machines. But when working with high RPM (24,000), always verify the fit is 100% correct. The balancing of these tools is done to a very high grade, and that's why it can run up to 24000RPM...
ISO30 ER32 Toolholder + Pullstud
89.99Toevoegen aan mandje (excl. btw)configurator

Mounting Device HSK50 C5 SK30

Mounting Device HSK50 C5 SK30For easy and safe clamping of tool shanks at the flange using rollers for mounting and removing cutting tools, therefore self clamping and ideal for HSK forms E and F as well as polygonal shanks. This model is for ISO30 and HSK50, wel also have models for other types. for all common tool shanks such as SK (DIN 69871), HSK (forms A, B, C, D, E, F), polygonal, MAS/BT (JIS B 6339) and CAT (ANSI B5...
Mounting Device HSK50 C5 SK30
169.99 (excl. btw)

TeknoMotor Toolholder Fork ISO 30

TeknoMotor Toolholder Fork ISO 30Toolholder fork for ISO30 toolholders. This product is designed and made in Holland. We always try to offer our clients the complete package of parts, for a good price. The problem with the Toolforks we found in the market, was that they had a very high price, and the quality was not what we expected. For that reason we decided to design/make our own toolforks.
TeknoMotor Toolholder Fork ISO 30
49.99Toevoegen aan mandje (excl. btw)

Spare Pullstud for TeknoMotor ATC

Spare Pullstud for TeknoMotor ATCSpare pullstud for TeknoMotor ATC toolholders. Please be very careful when using Other ISO30 holders in ATC motor. Often the cheapest ones, are only balanced up to 6000RPM, and can damage the ATC when running at high RPM.
Pullstud for TeknoMotor ATC
15.99Toevoegen aan mandje (excl. btw)

Configurator