Spare Parts

Quick Connector Metal Electronics Box

Quick Connector Metal Electronics BoxThe TeknoMotor C41/47 high speed milling motors, have a plastic electronics box by default. It does not have a connector but is wired direct to the motor. In many applications its better/easier to have a connector. We can get the TeknoMotor made with a quick connector on the motor frame, but then you have to make a choice for the winding, its either Star (380V) or Triangle (230V)...
TeknoMotor Quick Connector Metal Electronics Box (71x71x32mm)
59.99Toevoegen aan mandje (excl. btw)

Electronics Box

Electronics BoxThe electronics box on the TeknoMotors is made from plastic on most models. Since the motor is quite heavy, it is easy to damage the plastic part, when incorrectly handling the motor. In case you accidentally damage the cover. Here we sell the spares.
Electronics Box C3140 (Plastic Black)
6.99 (excl. btw)
Electronics Box C4147 (Plastic Black)
6.99 (excl. btw)

TeknoMotor Terminal Block

TeknoMotor Terminal Block
3.99 (excl. btw)

Terminal Box spares

Terminal Box sparesThese nuts/bridges are used to make a choice between star/triangle connection of the windings on a TeknoMotor. These are included when you buy a new motor. We offer them also as spare parts, since we often see clients lose parts, and then replace them with normal m4 nuts. This is not something we would advise, since these nuts are made from material that has a better electrical conductivity.
Terminal Box spares (6 nuts & 3 bridges)
4.99 (excl. btw)

Teknomotor Fan Cover

Teknomotor Fan Cover
Teknomotor Fan Cover for C41/47
5.00 (excl. btw)

Bearing sets for HF spindels

Bearing sets for HF spindels
Spare set of bearings for C31/40 18000RPM
24.99 (excl. btw)
Spare set of bearings for C41/47-C-SB-P-ER20-2.0KW-18000RPM
24.99 (excl. btw)

Spare Fans for HF spindels

Spare Fans for HF spindelsSpare Fans for the HF model TeknoMotors. The electrospindels have a different fan. We dont sell it seperate, since it is balanced with the motor, and cannot be removed/replaced without balancing the motor again.
Spare Fan for HF C2431 24000RPM
4.99 (excl. btw)
Spare Fan for HF C3140 18000RPM
4.99 (excl. btw)
Spare Fan for HF C4147 18000RPM
6.99 (excl. btw)

Spare Fan for ElectroSpindels / DC fan Cooling

Spare Fan for ElectroSpindels / DC fan CoolingElectroSpindels with DC fan cooling have two major advantages: they produce much less noise, and they allow the motor to run at very low RPM while maintaining enough cooling. Downside is, the DC Fan is not designed for the fast, sudden, radial movements of the milling motor in a CNC machine. This decreases the durability of this fan dramatically. Fortunately, this fan is easy to replace.
Spare Fan for ElectroSpindels with DC fan cooling
39.99 (excl. btw)

Spare Fan for ATC

Spare Fan for ATC
124.99 (excl. btw)

M23 Power Connector Female for ATC (Housing/Insert/Contacts)

M23 Power Connector Female for ATC (Housing/Insert/Contacts)
42.99 (excl. btw)

M23 Data Connector Female for ATC (Housing/Insert/Contacts)

M23 Data Connector Female for ATC (Housing/Insert/Contacts)
29.99 (excl. btw)

Configurator