Measurement tools

Granite measuring square DIN875/00

Granite measuring square DIN875/00Measuring square that we use here at DamenCNC to check alignment on CNC machines. It can be used to check if the X and Y axis on a CNC machine are really 90 degrees. Also it can be used when placed vertical to check if the Z-axis really moved in vertical direction or at an Angle. This is not a standard measuring square. Most squares you can buy are only allowed to be used in vertical direction...
300x200x60mm Granite measuring square DIN875/00
519.99 (excl. btw)configurator
400x250x60mm Granite measuring square DIN875/00
799.99 (excl. btw)configurator

Digital Micrometer Mitutoyo

Digital Micrometer MitutoyoA simple micrometer from mitutoyo. We use it when parts that are made on the CNC lathe need to be within a certain tolerance. With a caliper, measuring up to 0,01mm is possible. Some h7 or h6 tolerenaces we need to be able to measure in the 0,001mm range. Than we use this digital micrometer from mitutoyo.
Digital Micrometer 0 to 25mm 1/1000mm resolution
199.99 (excl. btw)configurator

Measuring stand

Measuring stand Meetstandaard op magnetische basis. Extra-zware uitvoering. Fijninstelling. Opname 8mm. Met on/off switch op de basis. V-vormige geslepen basis.
Measuring stand
79.99 (excl. btw)

Lever type dial indicator

Lever type dial indicator Universele binnenmeettaster. Meetunit met hardmetalen meettop. Automatische omkering van het meetpunt. Met zwaluwstaart-opname. Inclusief opspanschacht 6H6 - 8H6.
Lever Type Dial Indicator
81.99 (excl. btw)

Battery SR44

Battery SR44Type of battery often used in measuring equipment. Digital Calipers and micrometers
Duracell SR44 190mAH 1.55v (set of 2)
3.60 (excl. btw)

Configurator