Spring Sets for TCM

Spring Sets for TCM

Spring Sets for TCMWe offer several spring sets with different pressing forces for many cutting applications. S5 = pressing force approx. 5N / 500g S10 = pressing force approx. 10N / 1.000g S18 = pressing force approx. 18N / 1.800g S28 = pressing force approx. 28N / 2.800g The type of the spring set determines the coarse adjustment of the pressing force...
Spring set for TCM S5 (5N/500g)
18.99 (excl. btw)
Spring set for TCM S10 (10N/1000g)
18.99 (excl. btw)
Spring set for TCM S18 (18N/1800g)
18.99 (excl. btw)
Spring set for TCM S28 (28N/2800g)
18.99 (excl. btw)

TCM locking device for gliding element 35mm

TCM locking device for gliding element 35mm	When using the larger diameter G30 gliding element, the standard 25mm locking device, is not compatible. You then need this bigger diameter locking device.
TCM locking device for gliding element 35mm
29.99Toevoegen aan mandje (excl. btw)

G20 standard gliding element for TCM diameter 25mm

G20 standard gliding element for TCM diameter 25mmG20 Gliding element is the element that is standard on the ECOCAM TCM modules. So if you need to replace the original part, this is it.
G20 standard gliding element for TCM diameter 25mm
39.99Toevoegen aan mandje (excl. btw)

G13 tapered gliding element for TCM diameter 13mm

G13 tapered gliding element for TCM diameter 13mmThis is an optional gliding element, for the ECOCAM TCM (4,3,2,1), that sometimes replaced the G20 (standard) gliding element. The area in contact with the cutting materiaal, is less, so there is more surface pressure on the material. Also it has a longer taper, which means its less likely to get stuk on edges...
G13 tapered gliding element for TCM diameter 13mm
39.99Toevoegen aan mandje (excl. btw)

G30 gliding element for TCM diameter 30mm

G30 gliding element for TCM diameter 30mmThis is an optional gliding element, for the ECOCAM TCM (4,3,2,1), that sometimes replaced the G20 (standard) gliding element. The area in contact with the cutting materiaal, is more, so there is less surface pressure on the material. The taper of the edge is the same as on the G20...
G30 gliding element for TCM diameter 30mm
39.99Toevoegen aan mandje (excl. btw)

Configurator