DamenCNC Haase AL Series

Haase AL Series Profi-DamenCNC

Haase AL Series Profi-DamenCNCThere are many low cost CNC machines on the market. But most are low cost since inferior materials are used, or have unstable designs. We have been getting requests for years for a good relatively low cost machine. We have made the DCNC-Router also for this application as well. The problem is that it is a DIY kit, and the price of the kits is just as high as this complete machine from HAASE...
AL640 Profi-DamenCNC
4,299.99 (excl. btw)configurator
AL1065 Profi-DamenCNC
5,299.99 (excl. btw)configurator
AL1290 Profi-DamenCNC
6,299.99 (excl. btw)configurator

Integrate PC in machine

Integrate PC in machineWhen buying a CNC machine, most CNC suppliers, let the client supply their own PC on which the CNC software is run. With our CNC machines this is also possible. But it is not a route we prefer. We often see that hard disks fail, and for production machines, or critical systems it is important to use a more reliable PC. What we offer here is an SSD Intense PC...
Integrate PC in machine
1,469.99 (excl. btw)

Fogbuster Dual Head mounted on Haase AL Series

Fogbuster Dual Head mounted on Haase AL SeriesIf you wish to mill aluminum sheets on the DamenCNC Haase AL series, we advise to add this option. The Fogbuster is the best coolant system we have found so far. The dual head is perfect, since you can spray the coolant under 2 angles at the cutter...
Fogbuster Dual Head mounted on HAASE
1,299.99 (excl. btw)

Connection / BasicTraining / Delivery

HAASE AL Series Connection, Basic Training, Delivery
779.99 (excl. btw)

TeknoMotor mounting plate for AL series

TeknoMotor mounting plate for AL seriesTo be able to mount a TeknoMotor on the AL series Haase machines an adapter plate is required. This is the plate we offer for mounting the C31/40 type of TeknoMotor
TeknoMotor mounting plate for AL series machines
89.99 (excl. btw)

Haase 43mm KRESS mount

Haase 43mm KRESS mountThis KRESS mount is normally included with any AL-serie machine. We sell it as a spare part, so it is not required to order it with the machine.
Haase 43mm KRESS mount
28.99 (excl. btw)

Dust Extraction KRESS

Dust Extraction KRESSWhen working with CNC machines, dust and chips are created at a fast rate. With this Dust extraction system, the dust is reduced considerably. The dust extractor is screwed to the 43mm clamp for the KRESS, standard mounted on the Haase AL series machines. The threads required for mounting are already there. When using in combination with other mounts, the threads need to be made...
Dust Extraction KRESS
149.99 (excl. btw)configurator

Dust Extraction KRESS with material hold-down

Dust Extraction KRESS with material hold-down
199.99 (excl. btw)configurator

Dust Extraction for TeknoMotor

Dust Extraction for TeknoMotorThis Haase dust extraction add-on is useful for removing chips while simultaneously pressing down your (flat) workpiece to prevent vibrations. The white pressing device has a spring preload which will ensure an even pressure distribution.
Dust Extraction for TeknoMotor C31/40 DBS
259.99 (excl. btw)configurator

DCNC Undercarriage for AL series

DCNC Undercarriage for AL640
1,999.99 (excl. btw)

Undercarriage for AL1065 (ALU profile system)

Undercarriage for AL1065 (ALU profile system)Under Carriage for the AL1065 made from Aluminium profile system. Mainly 40x80 and 40x40mm profiles. Dibond panels all around make it a very stiff frame. In the front face we added sliding doors, so you can have some storage below it, but keep it out of view. It has been designed so that it can be upgraded to a full enclosure in a later stage...
Undercarriage for AL1065 (ALU profile system)
2,599.99 (excl. btw)configurator

Enclosure Cover for AL1065

Enclosure Cover for AL1065Enclosure cover that can be added to the Undercarriage for the AL1065.This version has sliding doors. We also have a version with normal doors. The price is including assembly of the frame. Shipping is difficult for these items. Normally its sold along with the machine, and then delivered at the same time...
Enclosure Cover for AL1065
2,499.99 (excl. btw)

Undercarriage for AL1290 (ALU profile system)

Undercarriage for AL1290 (ALU profile system)Under Carriage for the AL1290 made from Aluminium profile system. Mainly 40x80 and 40x40mm profiles. Dibond panels all around make it a very stiff frame. In the front face we added sliding doors, so you can have some storage below it, but keep it out of view. It has been designed so that it can be upgraded to a full enclosure in a later stage...
Undercarriage for AL1290 (ALU profile system)
2,999.99 (excl. btw)

Bracket for Door Interlock Switch

Bracket for Door Interlock Switch
10.99 (excl. btw)configurator

Move Control Panel to separate location

Move Control Panel to separate locationOn the Haase machine, normally the control panel is attached to the machine. Some clients prefer to have it in a different location. Often when making an enclosure, its better to have it on the Outside of the enclosure. At an extra charge we can move it to this location
Move Control Panel to separate location
199.99 (excl. btw)

Haase feet mount 80x160x18mm

Haase feet mount 80x160x18mmWhen building tables or frames to mount the DamenCNC Haase AL series, we often use these feetmount. The are intended to prevent the machine from accidently being moved in the XY plane. Even though the machine is heavy enough, and has rubber feet, it can happen that the machine moves accidently. To prevent any problems we have made these mounts...
Haase feet mount 80x160x18mm
14.99 (excl. btw)

Configurator