Verdeel Tafels

Horizontal-vertical circular dividing table

Horizontal-vertical circular dividing table Een kwaliteit verdeeltafel. Zowel horizontaal als verticaal te gebruiken. We hebben ook setjes om deze om te bouwen naar cnc. Zie het retrofit gedeelte van de website.
RT100
264.99 (excl. btw)
RT150
299.99 (excl. btw)configurator

Counter Center

CounterCenter_for RT100 & RT150
144.99 (excl. btw)
CounterCenter_for RT200/RTE165/RTU165
156.99 (excl. btw)

5C Collet Chuck 125mm

5C Collet Chuck 125mm We often use this 5C collet chucks on small Lathes. The working holding is much more precise in terms of run out, than what you can achieve with a 3 or 4 jaw chuck. This chuck is 125mm outside diameter, and has the standard 95mm mounting hole, which is common on small lathes from Optimum or HBM. For other lathes adapter plates can be made. This 5C chuck is also compatible with our indexing tables.
5C Collet Chuck 125mm
139.99 (excl. btw)configurator

3 Jaw chuck

3 Jaw Chuck 125mm (self centering) Premium
268.99 (excl. btw)configurator
Set of 3 Soft Jaws for Chuck 125mm Premium
54.99 (excl. btw)configurator

4 Jaw Chucks

4 Jaw Chuck Independent 125mm
139.99 (excl. btw)configurator

RT150 to 125mm Chuck Adapter

RT150 to 125mm Chuck AdapterThis is an adapter plate that we have designed for the RT150 dividing/indexing table. Optimum also has an adapter plate, but we find that very difficult to mount. Our own adapter has a very simple mounting procedure. Mount the 3 or 4 jaw chuck to the Adapter plate using the supplied bolts...
RT150 to 125mm Chuck Adapterplate
89.99 (excl. btw)

Configurator