12x200mm Concrete Anchor, Fischer FAZ II 12/100 95470

The fischer push-through anchor FAZ II is the steel anchor for the highest demands. This anchor secures heavy loads in cracked concrete. The FAZ II can be used particularly flexibly thanks to its two anchorage depths and easy mounting. The proven expansion clip guides the loads particularly reliably into the concrete and ensures the highest load-bearing capacity. With the galvanized steel version, loads are secured indoors.

The type we offer here is the M12 variant with a total length of 200mm. The minimum drilling depth that Fischer recommends for through hole mounting is 190mm. The thickness of the part to be fixed (tfix) for which the anchor is made is 100mm. The anchor can be used up to a thickness (tfix) of 120mm, but then the load that the anchor can have is reduced.

Component advantages:

According to the new assessment (ETA), the pulling power is significantly increased. As a result, fewer anchors are required.
The variable anchorage depths in sizes M8 to M16 allow for a millimeter-accurate adjustment to the loads for the first time.
International approvals guarantee optimum safety and best performance.

Component features:

• Drill diameter d0 = 12mm
• min. drill hole depth with push-through mounting h2 = 190mm
• Plug length l = 200mm
• max. useful length hef, standard tfix = 100
• max. useful length hef, reduced tfix = 120
• Thread Ø x Length M12 x 151mm
• Spanner width SW 19mm
• Packaging for extra discount: 25 pieces