 |
Compatible products Of excellent quality |
|
15 years of CNC-experience Dedication & Craftmanship |
 |
3D Step or CAD files For easy 3D modeling |
 |
Configured As you wish |
 |
Almost all parts Shipped from our stock |
| Previous article | Show list | Next article |
CENTRO Precision Centering Device (80.300.00.FHN)
Article number 3948
HAIMER
In Stock
EAN-number 4034221006738
€446,00
Excluding VAT
Price per piece
Description
Attachments
Compatible Products
The Haimer CENTRO easily and precisely centers milling machine spindles over holes, bores, shafts and circular bosses. Clamp the CENTRO into a tool holder and insert into the spindle of the milling machine. Position the machine spindle near the bore or shaft to be measured and rotate at low speed so that the probe tip of the CENTRO slides along the inside or outside surface of the diameter. Initially, the probe tip will be deflected and the amount of deflection is registered on the large dial. The stationary dial face does not turn with the spindle and therefore can always be seen by the operator. The position of the spindle can then easily be adjusted until the hands of the dial indicator stop moving. This indicates that the spindle axis is now perfectly aligned with the diameter center.
Component features:
-
Made in Germany
-
Metric Display Dial
-
Nominal measuring accuracy: 0.003mm / 0.0001"
-
16mm shaft diameter.
-
Max Rotation Speed: 150 RPM
-
Replaceable Probe Tips; includes straight tip with 5mm ball (bent tip available for larger diameters, 2mm straight tip also available)
-
Measure IDs from 3-125mm (0.1"-5")
-
Measure ODs from 0-125mm (0-5")
-
Check the axial run-out of the work piece to the spindle
-
Compensation of the run-out errors of the spindle and tool holder >> No adjustment necessary
-
Even in bigger distance the unusual size of the dial gauge is helpful to finish the job
-
Replaceable probes
-
Please take note: The given measuring precision of 0.01 mm only applies, if the original HAIMER probe tips are used.
-
Included in delivery: Centro with clamping shank Ø 16 mm, straight probe tip Ø 5 mm
-
Technical data subject to change without prior notice.
-
HAIMER Part Number 80.300.00.FHN
Attachments
Here you can find all attachments that are linked to the product. Click on the icon to download.
 |
3948 Haimer Centro Precision Centering Device |
Probe tip straight for CENTRO 5mm (80.301.00)
€31,00
Excluding VAT
Price per piece
Probe tip bent for CENTRO 5mm (80.302.00)
€40,00
Excluding VAT
Price per piece
Probe tip straight for CENTRO 2mm (80.303.00)
€33,00
Excluding VAT
Price per piece