CNC530 4-axis 125kHz Ethernet Software + Hardware interface

The latest CPU from EdingCNC goes one step further than the CPU5A, and is cheaper than the CNC720. The CNC530 is equipped with an Ethernet connection as standard, the card is fully 24VDC controlled and the step frequency is 125khz. The CNC530 has less I-O than the CNC720 and CNC760, but is therefore also more affordable in price. The perfect choice for 3-4 axis CNC milling machines, with not too many additional requirements. There is an optional DIN rail mounting unit. It's also possible to connect the pendant of the CPU5A, and of course also the wireless pendant from EdingCNC. Where other CPUs from EdingCNC require all kinds of different Breakout Boards to work with simple screw connections, these are not available for the CNC530. And that's good news, because they are not necessary. The CPU by default has screw terminals for all connections. There are 3 options for connecting the stepper or servo drives. 1. Screw terminals. 2. Flat Cables (like on the CPU 5A and 5B) and 3. RJ45 cables. So it's a one size fits all solutions. The CNC530 should really be seen as the successor to the CPU5A, which is why it was decided not to connect it to an IO card. It is really a basic/entry-level version for simple CNC machines. Pricewise it is therefore also more favorable. Do you need more axis or more IO? Then you can always switch to a CNC720 or CNC760. See the 'compatible products' tab for all suitable accessories.

Component features:

• Power input: 24VDC
• Communication with PC: 100Mbit Ethernet interface
• Number of axes: 4 axis (Tandem/Slave, 4 axis milling, tangential knife)
• Step frequency: 125 kHz (for Stepper/Servo control)
• Home inputs: 4 (NOTE only suitable for NPN sensors)
• Probe / Toolsetter input
• Pendant input
• Spindle Index input
• Alarm input
• Driver Alarm input
• PWM / 0-10V output
• Analog inputs: NONE
• Coolant outputs: 2 x (Flood & Mist)
• AUX output (Relay NO & NC)
• RS485 connection: NONE
• Optional: DIN rail mounting
• Optional: Pendant
• CONVENIENT: No more need for a Breakout Boards, everything is on the PCB
• For the latest version of USBCNC, visit www.edingcnc.com