 |
Compatible products Of excellent quality |
|
15 years of CNC-experience Dedication & Craftmanship |
 |
3D Step or CAD files For easy 3D modeling |
 |
Configured As you wish |
 |
Almost all parts Shipped from our stock |
CPU5B PWM->VOLT Board
In Stock
Conversion board to convert PWM signal from the EdingCNC CPU5B to 0-10V. This is a common method of setting the speed/RPM on a frequency converter. This is often used for controlling high-speed milling motors, for example from TeknoMotor. The milling motor is started by switching a digital input on the VFD. This is easy to switch with a relay output on this CPU5B PWM->Volt board. In the same way you can convert the direction signal of the motor with a 2nd relay on the printed circuit board. The good thing is that both of these relays are completely potential-free. So you can switch NPN or PNP. NO or NC, and you can also switch different voltages (5V,12V,24V etc). In practice, this means that this board is compatible with 99.9% of the frequency inverters on the market.
Component features:
- Fully isolated
- No additional power or auxiliary voltage from VFD required
- 10V is adjustable (small trim potentiometer on PCB)
- 2 relay outputs for spindle on/off and spindle direction
- Watchdog protected (if communication with CPU is lost, print will turn off)
- NOTE: in the EdingCNC software, in the 2nd tab of the setting, check invert PWM1
Attachments
Here you can find all attachments that are linked to the product. Click on the icon to download.
 |
5247-2 CPU5B PWM Volt Board For VFD Connection |
Not in stock
