Electrospindle C5160-A-2DB-P-ER32-HY-3.3kW-18.000-24.000rpm

The Electrospindle C5160 is one size larger and more powerful than the Electrospindle C4147. These motors are widely used on professional portal milling machines and are very suitable for both milling and drilling due to the ceramic double angular contact bearings in both the spindle nose and tail. By means of a variable frequency drive (VFD) the speed can be regulated between 6000 and 24000 revolutions per minute. Please note: the required VFD has a supply voltage of 3x400V; it is not possible to connect this motor and drive to the mains.

• Teknomotor part number: COM51600453
• Designed for heavy radial and axial loads
• Motor type: Manual Toolchanger
• Power rating: 3.3kW
• Speed range: 6000 - 24000 rpm
• Bearings: 2DB- Double angular contact Bearing in both spindle nose and tail
• Toolholder: Collets, ER32 collet size
• Frame: Extruded aluminium bar
• Stator: Three phase induction motor, insulation class F
• Rotor: Squirrel cage balanced according to ISO 1940, G2.5@24000rpm
• Type of Cooling: Shaft driven fan cooling
• Protection: IP 54
• Includes a balanced nut and spanners