ELGO Magnetic tape MB 20-25-10-1-R (price/meter)

The Magnetic tape consists of 3 components: A The magnetized, highly flexible plastic tape, connected on the lower side with: B Magnetic conductable and flexible stainless steel tape. It protects the plastic tape from mechanical damages and is a magnetic short circuit at the same time. This increases significantly the functional security under extreme magnetic influences. In standard both parts A and B are already factory-bonded (by ELGO). C To keep the flexibility for transport and installation, the third part a stainless, magnetic permeable steel tape is delivered separately. It serves for mechanical protection of the plastic tape, is already equipped with a sticky tape and must be bonded on the magnetic plastic tape after installation.

Component features:

• Width: 10 mm +/- 0.2 mm
• Bending radius: minimum 150 mm
• Protection class: IP67
• Working temperature range: 0° to + 70°C
• Operating temperature range: - 20° to + 85°C
• Humidity: max 80 % (non condensing)
• Operation height: max. 2000 m above sea level
• Thickness: 1.5 mm +/- 0.1 mm (without cover band) 1.8 mm +/- 0.1 mm (incl. cover band)
• max. possible length: Standard roll 32 m (up to 70 m on request)
• WARNING: Influence of external magnets: External magnetic fields must not exceed 64 mT (640 Oe; 52kA/m) at the surface of the magnetic tape. Higher values will damage or destroy the magnetic tape code. Magnetic fields > 1 mT at the measuring system has negative influences on the accuracy of the system