Groove Ball Bearing 4200-2RS 10x30x14 (Double row)

Double row design for higher load capacity. The double-row radial ball bearing 4200-2RS is ideal for high combined loads from the radial and axial directions. Main dimensions according to DIN 628-3. These are often used in project when ballscrews are mounted. The can be used for floating bearings. Some clients also use these for fixed bearings. In our opinion a double angular contact bearing is then a better choice. (3200ZZ) Because it has a 30 degree contact angle. But there are rare cases where this is a better choice. 

Component features:

• Inside diameter (mm): 10
• Outside diameter (mm): 30
• Width (mm): 14
• Contact Angle: 0°
• Row of balls: Double row
• Seal: ZZ
• Ring Material: Chrome Steel
• Rolling element material: Chrome steel
• Cage Material: plastic
• Magnetic: yes
• Type of lubrication: greased for life
• Weight: 0.0920 Kg
• Deep groove ball bearing with two rows of balls
• Suitable for high radial loads and mild axial loads in both directions
• Suitable for high running accuracy, quiet running and high speeds
• Cge material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
• Seal: Rubber seal(RS)
• Good fixed floating property, but can also be used as a fixed bearing, each in both directions