Small vacuum pump with a flow of 8m3/hour. Suitable for smaller vacuum tables, such as a SEAL series from 20x20cm to a maximum of 40x20cm.

These dry-running vacuum pumps are manufactured according to the latest technical standards and safety regulations. If not installed correctly or used as directed, hazardous situations or damage may result. These vacuum pumps are designed for use in the coarse vacuum field. They can be used to extract or transport air or dry gases, which are not aggressive, toxic or explosive. Other medium resources may not be transported.

New: including Switching device for convenient operation of your vacuum pump!

Development of noise and heat in the operating room of the CNC Machine is always a nuisance. It is best to position the vacuum pump as far away from the control area as possible. This is very easy to achieve when using the switching device that we include with our vacuum pumps, with a power of up to 1.3 kW. 

Simply install the switching device on the control area where the CNC machine is located.Two screws to securely fasten it to a suitable surface) and to securely attach the pipes and hoses to the vacuum pump. At this point it should be verified that there is nothing in the way to trip over and that there is sufficient space between the parts in the whole area. The standard issued cable length is a maximum of 4m.

Now the switching device can be connected to a normal 230VAC 1 phase socket and the device is then operational.

The advantages of Rotary Vane pumps:

• Oil-free, completely dry pumping. Works according to the rotating vane principle and uses self-lubricating carbon fins.
• Reliable proven design. High quality materials.
• Maintenance-free motor with fan for cooling. Sealed bearings.
• Economical, low in energy consumption. Can be used as a vacuum pump or compressor.
• Environmentally friendly oil-free pumping. Little noise.
• Compact Direct-drive construction. Rotor is mounted tapered to the motor shaft.

Technical details:

• Nominal displacement/volume flow 50Hz m3/h -> 8
• Ultimate Pressure hPa (mbar) -> 120
• Nominal motor power 50Hz kW -> 0.25
• Nominal motor speed 50Hz min-1 -> 2800
• Noise level(DIN 45635)* 50Hz dB(A) -> 60
• Weight approximately 8.5 kilos