The rectangular C85/90 motors have limited radial dimensions and yet a lot of power. These saw motors can easily be built into many different types of machines thanks to their efficient housing. This type of motor is often used in the woodworking industry for sawing machines (BT type) and is the best solution if you are looking for a motor that is of high quality, compact and powerful. In the series of saw motors, this is the largest and most powerful motor that TeknoMotor has to offer. This is really a heavy weight. The motor weighs 57kg. The motor has 7.5kW power at 3000RPM. This type also has very heavy bearings. It is a 2DB configuration. This means that there are double angle contact bearings both at the front and rear of the motor. These are preloaded, which makes it possible to saw very precisely. These saw motors are part of the big blade series, and intended for saw blades of 400mm diameter and larger.

Component features:

• Teknomotor part number: COM85900143
• TeknoMotor Series: Big Blade Series
• 2DB Double angle contact bearing model, suitable for heavy radial and axial loads
• Very compact motor with many kW in a small housing
• May only run CCW (counter clockwise when seen from the rear of the motor, has left hand thread)
• Frame: extruded aluminum bar
• Stator: three-phase induction motor, insulation class F
• Rotor: Squirrel cage balanced ISO 1940 standard class 2.5
• Cooling: Shaft-driven cooling
• Protection degree: IP 54
• Balancing: Standard balancing