Energy element mounted on the robot side of the tool changer. This type has (3+PE)/(4) pins and is commonly used to supply power to equipment mounted on the tool side. The connector interface used is a standard M23 ((3+PE)/(4)), which is suitable for straight and angular types. The element itself can also be mounted straight or at an angle. See the third image to change the orientation. There an instruction is given on how to change the orientation on the connector. This configuration of (3+PE)/(4), has a total of 8 pins. Of these, the 3+PE are usually used for the UVW+PE power supply for electric motors or milling motors. The 4 other pins are usually data/sensor pins, to read things like a PTC or other temperature monitoring in motors. Of course it can also be used for completely different purposes. But the connector type is common on TeknoMotor's ATC71 milling motors.

Component features:

• Robot or tool side: Robot side
• Number of pins: (3+PE)/(4), so 8 pieces in total
• Can be mounted straight or angled (part can be rotated 90 degrees)
• Zimmer part number: WER3000FLA08-00
• Compatible with element on the tool side 5662 WER3000LLA08-00 (3+PE)/4 Energy element for tool changer, Ø200mm, WWR160L-B (tool side)
• Compatible with 5654 and 5655 APWER elements
• Compatible with M23 connectors (3+PE)/(4)